|
|
|
National Stock Number:
5925-00-726-4460
Federal Supply Class:
5925
National Item Identification Number:
007264460
Description:
CIRCUIT BREAKER BOX
Detail:
An enclosure which includes, mounts, and protects one or more circuit breakers. It is designed for and may include a cover and such accessories as mounting hardware, brackets, and conduit fittings. May include terminal boards and/or bus conductors used as a convenience for terminating the circuit breakers. May include handle tie bars. It is usually used as a load center for the protection of certain electrical devices such as water heaters, motors, etc., or as a service center for homes or offices. For boxes which include only switches, jacks, fuseholders, terminals and/or terminal boards or fuseholders, or any combination of these devices, see SWITCH BOX; JACK BOX; TERMINAL BOX; and DISTRIBUTION BOX. For boxes designed to mount and protect but do not include circuit breakers, see CIRCUIT BREAKER BOX SUBASSEMBLY. See also INTERCONNECTING CABINET; PANEL, POWER DISTRIBUTION; JUNCTION BOX; and CABINET, ELECTRICAL EQUIPMENT.
|
Manufacturer Information:
| FAE36100S | 14280 | SCHNEIDER ELECTRIC USA, INC. | | FAE36100S | 56365 | SCHNEIDER ELECTRIC USA, INC. | | NEF62100RAND1100 | 77176 | FEDERAL PACIFIC ELECTRIC CO |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 7.031 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 13.500 INCHES NOMINAL | | CIRCUIT BREAKER CURRENT RATING IN AMPS | 100.0 | | CIRCUIT BREAKER IDENTIFICATION | NEF62100R | | CIRCUIT BREAKER MANUFACTURER CODE | 77176 | | CIRCUIT BREAKER TYPE AND QUANTITY | 1 TRIPLE POLE | | HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | GENERAL PURPOSE-NEMA TYPE 1 | | MAIN LINE MAXIMUM AC VOLTAGE RATING IN VOLTS | 600.0 | | MAIN LINE MAXIMUM CURRENT RATING IN AMPS | 100.0 | | OVERALL DEPTH | 3.812 INCHES NOMINAL | | OVERALL HEIGHT | 14.531 INCHES NOMINAL | | OVERALL WIDTH | 7.875 INCHES NOMINAL | | MATERIAL | STEEL | | MOUNTING METHOD | UNTHREADED HOLE | | STANDARD MOUNTING PATTERN DESIGNATOR | 4 POINT-RECTANGULAR | | STYLE DESIGNATOR | RECTANGULAR, FLUSH MOUNTING | | SURFACE TREATMENT | PAINT | | SYSTEM FOR WHICH DESIGNED | THREE WIRE THREE PHASE | | UNTHREADED MOUNTING HOLE DIAMETER | 0.344 INCHES NOMINAL |
|
|