| SWITCH CURRENT RATING AND TYPE IN AMPS | 5.0 AC AND 1.0 DC |
| INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED | EXPLOSION RESISTANT AND FUNGUS RESISTANT AND MOISTURE RESISTANT |
| BODY LENGTH | 2.530 INCHES NOMINAL |
| MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE | 10.0 AMPERES AC ALL LOCATIONS |
| NOMINAL THREAD SIZE | 0.138 INCHES |
| ACTUATOR FUNCTION | TRIP-RESET |
| SWITCH LOCATION AND POSITION DESIGNATION | INTERNAL AT POLE ONE |
| POLE QUANTITY | 3 |
| MANUAL ACTUATOR TYPE AND QUANTITY | 3 TOGGLE |
| STORAGE TYPE | GENERAL PURPOSE WAREHOUSE |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 2.480 INCHES NOMINAL |
| BOSS HEIGHT | 0.150 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 32 |
| EXTERNAL ACTUATOR LINKAGE ARRANGEMENT | ONE, TWO, AND THREE LINKED |
| FREQUENCY IN HERTZ | 60.0 ALL LOCATIONS |
| MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS | 1000.0 AC ALL LOCATIONS |
| SWITCH VOLTAGE RATING AND TYPE IN VOLTS | 125.0 AC AND 50.0 DC |
| BODY STYLE | MULTIPOLE-MULTIPLE ACTUATOR TYPE |
| SWITCH TERMINAL TYPE | TAB W/SCREW |
| ACTUATOR POSITION DESIGNATION | AT EACH POLE |
| OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS | 250.0 AC ALL LOCATIONS |
| BODY WIDTH | 2.228 INCHES NOMINAL |
| ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT | 115.0 ALL LOCATIONS |
| MOUNTING FACILITY TYPE AND QUANTITY | 6 THREADED HOLE |
| INTERNAL TRIP RELEASE CONFIGURATION | SERIES TRIP ALL LOCATIONS |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.750 INCHES NOMINAL |
| TRIP RELEASE CHARACTERISTIC | TIME DELAY ALL LOCATIONS |
| RESET METHOD | MANUAL |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 1.940 INCHES NOMINAL |
| TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT | 4.000 MINIMUM AT 200 PCT AND 10.000 MAXIMUM AT 200 PCT ALL LOCATIONS |
| ULTIMATE TRIP TIME PER POLE IN SECONDS | 18.000 MINIMUM AND 70.000 MAXIMUM ALL LOCATIONS |
| THREAD PITCH DIAMETERS | +0.1177 TO 0.1214 INCHES |
| CIRCUIT PROTECTION TYPE | OVERCURRENT ALL LOCATIONS |
| AUXILIARY SWITCH FUNCTION AND QUANTITY | 1 CONTROL |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH | 0.750 INCHES NOMINAL |
| SWITCH CONTACT ARRANGEMENT | SINGLE POLE, DOUBLE THROW |
| THREAD SERIES DESIGNATOR | UNC |
| TERMINAL TYPE AND QUANTITY | 6 THREADED STUD |
| TRIP RELEASE METHOD | MAGNETIC-HYDRAULIC ALL LOCATIONS |
| CASE MATERIAL | PLASTIC |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 2.060 INCHES NOMINAL |
| MAIN CONTACT TRIPPING MECHANISM TYPE | TRIP FREE |