| POLE QUANTITY | 4 |
| MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE | 60.0 AMPERES AC FIRST LOCATION |
| 60.0 AMPERES AC SECOND LOCATION |
| 70.0 AMPERES AC THIRD LOCATION |
| CIRCUIT PROTECTION TYPE | OVERCURRENT ALL LOCATIONS |
| TERMINAL TYPE AND QUANTITY | 8 SCREW |
| OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS | 250.0 AC FIRST LOCATION |
| 250.0 AC SECOND LOCATION |
| 250.0 AC THIRD LOCATION |
| 36.0 DC FOURTH LOCATION |
| TRIP RELEASE CHARACTERISTIC | TIME DELAY FIRST LOCATION |
| TIME DELAY SECOND LOCATION |
| TIME DELAY THIRD LOCATION |
| INSTANTANEOUS FOURTH LOCATION |
| RESET METHOD | MANUAL |
| BODY STYLE | MULTIPOLE-MULTIPLE ACTUATOR TYPE |
| MOUNTING FACILITY TYPE AND QUANTITY | 8 THREADED HOLE AND |
| 8 SLOT |
| CASE MATERIAL | PLASTIC |
| UNPACKAGED UNIT WEIGHT | 2.438 POUNDS NOMINAL |
| TRIP RELEASE METHOD | MAGNETIC ALL LOCATIONS |
| FREQUENCY IN HERTZ | 400.0 FIRST LOCATION |
| 400.0 SECOND LOCATION |
| 400.0 THIRD LOCATION |
| MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS | 5000.0 AC AND |
| 5000.0 DC ALL LOCATIONS |
| INTERNAL TRIP RELEASE CONFIGURATION | SERIES TRIP FIRST LOCATION |
| SERIES TRIP SECOND LOCATION |
| SERIES TRIP THIRD LOCATION |
| SERIES TRIP W/AUXILIARY LOAD TERMINAL FOURTH LOCATION |
| TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT | 4.000 MINIMUM AT 200 PCT AND |
| 10.500 MAXIMUM AT 200 PCT FIRST LOCATION |
| 4.000 MINIMUM AT 200 PCT AND |
| 10.500 MAXIMUM AT 200 PCT SECOND LOCATION |
| 10.500 MAXIMUM AT 200 PCT THIRD LOCATION |
| ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT | 150.0 ALL LOCATIONS |
| MAIN CONTACT TRIPPING MECHANISM TYPE | TRIP FREE |
| BODY LENGTH | 5.844 INCHES NOMINAL |
| BODY WIDTH | 3.096 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 3.546 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH | 1.032 INCHES NOMINAL |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 2.750 INCHES NOMINAL |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.032 INCHES NOMINAL |
| BOSS HEIGHT | 0.218 INCHES NOMINAL |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 2.609 INCHES NOMINAL |
| THREAD SERIES DESIGNATOR | UNC |
| NOMINAL THREAD SIZE | 0.138 INCHES |
| THREAD QUANTITY PER INCH | 32 |
| MOUNTING SLOT WIDTH | 0.164 INCHES NOMINAL |
| MANUAL ACTUATOR TYPE AND QUANTITY | 4 TOGGLE |
| ACTUATOR FUNCTION | TRIP-RESET |
| ACTUATOR POSITION DESIGNATION | AT EACH POLE |
| EXTERNAL ACTUATOR LINKAGE ARRANGEMENT | ONE, TWO, THREE, AND FOUR LINKED |
| AUXILIARY SWITCH FUNCTION AND QUANTITY | 1 ALARM |
| SWITCH LOCATION AND POSITION DESIGNATION | INTERNAL AT POLE FOUR |
| SWITCH CONTACT ARRANGEMENT | SINGLE POLE, DOUBLE THROW |
| SWITCH CURRENT RATING AND TYPE IN AMPS | 10.0 AC AND |
| 4.0 DC |
| SWITCH VOLTAGE RATING AND TYPE IN VOLTS | 250.0 AC AND |
| 30.0 DC |
| SWITCH TERMINAL TYPE | QUICK DISCONNECT, MALE |
| INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED | FUNGUS RESISTANT AND |
| MOISTURE RESISTANT |
| TEST DATA DOCUMENT | 80063-SM-A-838519 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| ARC QUENCHING METHOD | MAGNETIC BLOWOUT |
| STORAGE TYPE | GENERAL PURPOSE WAREHOUSE |
| SPECIAL HANDLING FEATURE | MAGNETIC |
| FRAGILITY FACTOR | MODERATELY RUGGED |