| POLE QUANTITY | 4 |
| MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE | 60.0 AMPERES AC SECOND LOCATION |
| 60.0 AMPERES AC THIRD LOCATION |
| 60.0 AMPERES AC FOURTH LOCATION |
| CIRCUIT PROTECTION TYPE | UNDERVOLTAGE FIRST LOCATION |
| OVERCURRENT SECOND LOCATION |
| OVERCURRENT THIRD LOCATION |
| OVERCURRENT FOURTH LOCATION |
| TERMINAL TYPE AND QUANTITY | 10 THREADED STUD |
| OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS | 107.0 DC FIRST LOCATION |
| 240.0 AC SECOND LOCATION |
| 240.0 AC THIRD LOCATION |
| 240.0 AC FOURTH LOCATION |
| TRIP RELEASE CHARACTERISTIC | INSTANTANEOUS FIRST LOCATION |
| TIME DELAY SECOND LOCATION |
| TIME DELAY THIRD LOCATION |
| TIME DELAY FOURTH LOCATION |
| RESET METHOD | MANUAL |
| BODY STYLE | MULTIPOLE-MULTIPLE ACTUATOR TYPE |
| MOUNTING FACILITY TYPE AND QUANTITY | 8 THREADED HOLE AND |
| 8 SLOT |
| CASE MATERIAL | PLASTIC |
| TRIP RELEASE METHOD | MAGNETIC FIRST LOCATION |
| MAGNETIC-HYDRAULIC SECOND LOCATION |
| MAGNETIC-HYDRAULIC THIRD LOCATION |
| MAGNETIC-HYDRAULIC FOURTH LOCATION |
| FREQUENCY IN HERTZ | 400.0 SECOND LOCATION |
| 400.0 THIRD LOCATION |
| 400.0 FOURTH LOCATION |
| MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS | 5000.0 AC SECOND LOCATION |
| 5000.0 AC THIRD LOCATION |
| 5000.0 AC FOURTH LOCATION |
| INTERNAL TRIP RELEASE CONFIGURATION | SERIES TRIP ALL LOCATIONS |
| TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT | 4.000 MINIMUM AT 200 PCT AND |
| 10.000 MAXIMUM AT 200 PCT SECOND LOCATION |
| 4.000 MINIMUM AT 200 PCT AND |
| 10.000 MAXIMUM AT 200 PCT THIRD LOCATION |
| 10.000 MAXIMUM AT 200 PCT FOURTH LOCATION |
| ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT | 140.0 SECOND LOCATION |
| 140.0 THIRD LOCATION |
| 140.0 FOURTH LOCATION |
| MAIN CONTACT TRIPPING MECHANISM TYPE | TRIP FREE |
| BODY LENGTH | 5.844 INCHES NOMINAL |
| BODY WIDTH | 3.096 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 3.546 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH | 1.032 INCHES NOMINAL |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 2.750 INCHES NOMINAL |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.032 INCHES NOMINAL |
| BOSS HEIGHT | 0.218 INCHES NOMINAL |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 2.609 INCHES NOMINAL |
| THREAD SERIES DESIGNATOR | UNC |
| NOMINAL THREAD SIZE | 0.138 INCHES |
| THREAD QUANTITY PER INCH | 32 |
| MOUNTING SLOT WIDTH | 0.164 INCHES NOMINAL |
| MANUAL ACTUATOR TYPE AND QUANTITY | 4 TOGGLE |
| ACTUATOR FUNCTION | TRIP-RESET |
| ACTUATOR POSITION DESIGNATION | AT EACH POLE |
| EXTERNAL ACTUATOR LINKAGE ARRANGEMENT | ONE, TWO, THREE, AND FOUR LINKED |
| INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED | FUNGUS RESISTANT AND |
| MOISTURE RESISTANT |
| TEST DATA DOCUMENT | 49956-G166010 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| ARC QUENCHING METHOD | MAGNETIC BLOWOUT |
| STORAGE TYPE | GENERAL PURPOSE WAREHOUSE |
| SPECIAL HANDLING FEATURE | MAGNETIC |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| SPECIAL FEATURES | FOUR TERMINALS ON POLE ONE |