5925-01-189-5290, CIRCUIT BREAKER

National Stock Number:
5925-01-189-5290

Federal Supply Class:
5925

National Item Identification Number:
011895290

Description:
CIRCUIT BREAKER

Detail:
A DEVICE WITH MEANS OTHER THAN FUSES FOR AUTOMATICALLY OPENING THE CIRCUIT IN WHICH IT IS INSTALLED WHEN THE CURRENT VARIES FROM THE PREDETERMINED VALUE FOR WHICH THE DEVICE IS SET. MAY INCLUDE PROVISIONS FOR MANUAL OPERATION. AT LEAST ONE SET OF CONTACTS MUST BE IN SERIES WITH THE ACTUATING ELEMENT(S). A COMBINATION OF SEMICONDUCTOR AND PASSIVE DEVICES MAY BE USED IN LIEU OF CONTACTS. FOR AUTOMATICALLY OPERATED ITEMS IN WHICH THE ACTUATING (TRIPPING) ELEMENT AND CONTACTS ARE NOT IN SERIES, SEE RELAY (AS MODIFIED). FOR ITEMS WHICH ARE OPERATED BOTH MANUALLY AND AUTOMATICALLY BUT THE ACTUATING ELEMENTS AND CONTACT ARE NOT IN SERIES, SEE RELAY-SWITCH. EXCLUDES CIRCUIT BREAKER BOX AND MAGNETO "BREAKER" ASSEMBLIES. SEE ALSO SWITCH (AS MODIFIED); AND CONTROLLER.

Manufacturer Information:

JE1-A3-5-2

74193

EATON CORP HEINEMANN PRODUCTS COMMERCIAL CONTROLS DIV

Techincal Specification:

POLE QUANTITY	1
MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE	5.0 AMPERES AC SINGLE LOCATION
CIRCUIT PROTECTION TYPE	OVERCURRENT SINGLE LOCATION
TERMINAL TYPE AND QUANTITY	2 QUICK DISCONNECT, MALE
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS	250.0 AC SINGLE LOCATION
TRIP RELEASE CHARACTERISTIC	TIME DELAY SINGLE LOCATION
RESET METHOD	MANUAL
BODY STYLE	SINGLE POLE TYPE
MOUNTING FACILITY TYPE AND QUANTITY	1 THREADED BUSHING
CASE MATERIAL	PLASTIC
TRIP RELEASE METHOD	MAGNETIC-HYDRAULIC SINGLE LOCATION
FREQUENCY IN HERTZ	50.0 OR
	60.0 SINGLE LOCATION
MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS	1000.0 AC SINGLE LOCATION
INTERNAL TRIP RELEASE CONFIGURATION	SERIES TRIP SINGLE LOCATION
TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT	2.000 MINIMUM AT 200 PCT AND
	22.000 MAXIMUM AT 200 PCT SINGLE LOCATION
ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT	125.0 SINGLE LOCATION
MAIN CONTACT TRIPPING MECHANISM TYPE	TRIP FREE
BUSHING LENGTH	0.344 INCHES MINIMUM AND
	0.406 INCHES MAXIMUM
BODY LENGTH	1.969 INCHES MINIMUM AND
	2.031 INCHES MAXIMUM
BODY WIDTH	0.719 INCHES MINIMUM AND
	0.781 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH	1.529 INCHES MINIMUM AND
	1.591 INCHES MAXIMUM
MOUNTING SURFACE TO TERMINAL END DISTANCE	2.094 INCHES MINIMUM AND
	2.156 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNEF
NOMINAL THREAD SIZE	0.375 INCHES
THREAD QUANTITY PER INCH	32
MANUAL ACTUATOR TYPE AND QUANTITY	1 TOGGLE
ACTUATOR FUNCTION	TRIP-RESET
ACTUATOR POSITION DESIGNATION	AT POLE ONE
INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED	DUSTPROOF
ARC QUENCHING METHOD	MAGNETIC BLOWOUT
STORAGE TYPE	GENERAL PURPOSE WAREHOUSE
FRAGILITY FACTOR	MODERATELY RUGGED

Click here to Register for Free 30-day Trial