5925-01-195-2214, CIRCUIT BREAKER

5910-01-195-2213 CAPACITOR,FIXED,ELECTROLYTIC

National Stock Number:
5925-01-195-2214

Federal Supply Class:
5925

National Item Identification Number:
011952214

Description:
CIRCUIT BREAKER

Detail:
A DEVICE WITH MEANS OTHER THAN FUSES FOR AUTOMATICALLY OPENING THE CIRCUIT IN WHICH IT IS INSTALLED WHEN THE CURRENT VARIES FROM THE PREDETERMINED VALUE FOR WHICH THE DEVICE IS SET. MAY INCLUDE PROVISIONS FOR MANUAL OPERATION. AT LEAST ONE SET OF CONTACTS MUST BE IN SERIES WITH THE ACTUATING ELEMENT(S). A COMBINATION OF SEMICONDUCTOR AND PASSIVE DEVICES MAY BE USED IN LIEU OF CONTACTS. FOR AUTOMATICALLY OPERATED ITEMS IN WHICH THE ACTUATING (TRIPPING) ELEMENT AND CONTACTS ARE NOT IN SERIES, SEE RELAY (AS MODIFIED). FOR ITEMS WHICH ARE OPERATED BOTH MANUALLY AND AUTOMATICALLY BUT THE ACTUATING ELEMENTS AND CONTACT ARE NOT IN SERIES, SEE RELAY-SWITCH. EXCLUDES CIRCUIT BREAKER BOX AND MAGNETO "BREAKER" ASSEMBLIES. SEE ALSO SWITCH (AS MODIFIED); AND CONTROLLER.

Manufacturer Information:

AP411-5329-2

81541

SENSATA TECHNOLOGIES MARYLAND, INC

Techincal Specification:

ACTUATOR FUNCTION	TRIP-RESET
ACTUATOR POSITION DESIGNATION	AT POLE TWO
BODY LENGTH	1.562 INCHES MAXIMUM
BODY STYLE	MULTIPOLE-SINGLE ACTUATOR TYPE
BODY WIDTH	1.937 INCHES MAXIMUM
BUSHING LENGTH	0.380 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH	0.875 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH	0.625 INCHES NOMINAL
CIRCUIT PROTECTION TYPE	OVERCURRENT SECOND LOCATION
CIRCUIT PROTECTION TYPE	OVERCURRENT THIRD LOCATION
CIRCUIT PROTECTION TYPE	OVERVOLTAGE FIRST LOCATION
FREQUENCY IN HERTZ	50.0 OR 60.0 ALL LOCATIONS
INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED	HERMETICALLY SEALED
INTERNAL TRIP RELEASE CONFIGURATION	RELAY TRIP FIRST LOCATION
INTERNAL TRIP RELEASE CONFIGURATION	SERIES TRIP SECOND LOCATION
INTERNAL TRIP RELEASE CONFIGURATION	SERIES TRIP THIRD LOCATION
MAIN CONTACT TRIPPING MECHANISM TYPE	TRIP FREE
MANUAL ACTUATOR TYPE AND QUANTITY	1 TOGGLE
MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE	2.0 AMPERES AC SECOND LOCATION
MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE	2.0 AMPERES AC THIRD LOCATION
MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS	1000.0 AC ALL LOCATIONS
MOUNTING FACILITY TYPE AND QUANTITY	1 THREADED BUSHING W/PANEL SEAL
MOUNTING SURFACE TO TERMINAL END DISTANCE	1.780 INCHES MAXIMUM
NOMINAL THREAD SIZE	0.375 INCHES
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS	115.0 AC FIRST LOCATION
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS	250.0 AC SECOND LOCATION
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS	250.0 AC THIRD LOCATION
POLE QUANTITY	3
RESET METHOD	MANUAL
STORAGE TYPE	GENERAL PURPOSE WAREHOUSE
TERMINAL TYPE AND QUANTITY	2 TAB, SOLDER LUG AND 6 WIRE HOOK
THREAD SERIES DESIGNATOR	UNEF
THREAD QUANTITY PER INCH	32
TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT	0.900 MINIMUM AT 200 PCT AND 4.500 MAXIMUM AT 200 PCT SECOND LOCATION
TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT	0.900 MINIMUM AT 200 PCT AND 4.500 MAXIMUM AT 200 PCT THIRD LOCATION
TRIP RELEASE CHARACTERISTIC	TIME DELAY SECOND LOCATION
TRIP RELEASE CHARACTERISTIC	TIME DELAY THIRD LOCATION
TRIP RELEASE CHARACTERISTIC	INSTANTANEOUS FIRST LOCATION
TRIP RELEASE METHOD	MAGNETIC ALL LOCATIONS
ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT	115.0 ALL LOCATIONS
UNPACKAGED UNIT WEIGHT	4.800 OUNCES NOMINAL

Click here to Register for Free 30-day Trial