| POLE QUANTITY | 5 |
| MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE | 10.0 AMPERES AC FIRST LOCATION |
| 10.0 AMPERES AC SECOND LOCATION |
| 10.0 AMPERES AC THIRD LOCATION |
| 5.0 AMPERES DC FOURTH LOCATION |
| 5.0 AMPERES DC FIFTH LOCATION |
| CIRCUIT PROTECTION TYPE | OVERCURRENT ALL LOCATIONS |
| TERMINAL TYPE AND QUANTITY | 12 THREADED STUD |
| OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS | 240.0 AC FIRST LOCATION |
| 240.0 AC SECOND LOCATION |
| 240.0 AC THIRD LOCATION |
| 140.0 DC FOURTH LOCATION |
| 140.0 DC FIFTH LOCATION |
| TRIP RELEASE CHARACTERISTIC | TIME DELAY ALL LOCATIONS |
| RESET METHOD | MANUAL |
| BODY STYLE | MULTIPOLE-MULTIPLE ACTUATOR TYPE |
| MOUNTING FACILITY TYPE AND QUANTITY | 10 THREADED HOLE AND |
| 5 SLOT |
| CASE MATERIAL | PLASTIC |
| TRIP RELEASE METHOD | MAGNETIC-HYDRAULIC ALL LOCATIONS |
| FREQUENCY IN HERTZ | 60.0 FIRST LOCATION |
| 60.0 SECOND LOCATION |
| 60.0 THIRD LOCATION |
| MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS | 5000.0 AC FIRST LOCATION |
| 5000.0 AC SECOND LOCATION |
| 5000.0 AC THIRD LOCATION |
| 5000.0 DC FOURTH LOCATION |
| 5000.0 DC FIFTH LOCATION |
| INTERNAL TRIP RELEASE CONFIGURATION | SERIES/RELAY TRIP FIRST LOCATION |
| SERIES TRIP SECOND LOCATION |
| SERIES TRIP THIRD LOCATION |
| SERIES TRIP FOURTH LOCATION |
| SERIES TRIP FIFTH LOCATION |
| AUXILIARY TRIP COIL VOLTAGE TYPE AND RATING IN VOLTS | 25.0 DC NOMINAL FIRST LOCATION |
| TRIP RELEASE DUTY CYCLE | CONTINUOUS FIRST LOCATION |
| TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT | 20.000 MINIMUM AT 200 PCT AND |
| 100.000 MAXIMUM AT 200 PCT FIRST LOCATION |
| 20.000 MINIMUM AT 200 PCT AND |
| 100.000 MAXIMUM AT 200 PCT SECOND LOCATION |
| 100.000 MAXIMUM AT 200 PCT THIRD LOCATION |
| 25.000 MINIMUM AT 200 PCT AND |
| 95.000 MAXIMUM AT 200 PCT FOURTH LOCATION |
| 95.000 MAXIMUM AT 200 PCT FIFTH LOCATION |
| ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT | 125.0 ALL LOCATIONS |
| MAIN CONTACT TRIPPING MECHANISM TYPE | TRIP FREE |
| BODY LENGTH | 4.740 INCHES MINIMUM AND |
| 4.760 INCHES MAXIMUM |
| BODY WIDTH | 5.180 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 3.537 INCHES MINIMUM AND |
| 3.557 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH | 1.016 INCHES MINIMUM AND |
| 1.036 INCHES MAXIMUM |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 2.740 INCHES MINIMUM AND |
| 2.760 INCHES MAXIMUM |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.016 INCHES MINIMUM AND |
| 1.036 INCHES MAXIMUM |
| BOSS HEIGHT | 0.209 INCHES MINIMUM AND |
| 0.229 INCHES MAXIMUM |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 3.475 INCHES MINIMUM AND |
| 3.495 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNC |
| NOMINAL THREAD SIZE | 0.138 INCHES |
| THREAD QUANTITY PER INCH | 32 |
| MOUNTING SLOT WIDTH | 0.164 INCHES NOMINAL |
| MANUAL ACTUATOR TYPE AND QUANTITY | 5 TOGGLE |
| ACTUATOR FUNCTION | TRIP-RESET |
| ACTUATOR POSITION DESIGNATION | AT EACH POLE |
| EXTERNAL ACTUATOR LINKAGE ARRANGEMENT | ONE, TWO, THREE, FOUR, AND FIVE LINKED |
| INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED | VIBRATION RESISTANT AND |
| SHOCK RESISTANT AND |
| MOISTURE RESISTANT AND |
| SALT SPRAY PROOF |
| ARC QUENCHING METHOD | MAGNETIC BLOWOUT |
| STORAGE TYPE | GENERAL PURPOSE WAREHOUSE |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| SPECIAL FEATURES | FULL LENGTH BARRIERS BETWEEN POLES INCLUDED |