| TERMINAL TYPE | TAB, SOLDER LUG |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 8 SINGLE ACTUATOR |
| STYLE DESIGNATOR | TAP, SQUARE FRAME |
| OVERALL LENGTH | 2.510 INCHES NOMINAL |
| OVERALL HEIGHT | 1.750 INCHES NOMINAL |
| OVERALL WIDTH | 1.750 INCHES NOMINAL |
| INDIVIDUAL SECTION QUANTITY | 2 |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| POLE QUANTITY | 2 EACH SECTION FRONT |
| THROW QUANTITY | 8 EACH SECTION FRONT |
| CONTACT SWITCHING ACTION | MAKES BEFORE BREAKS 1ST SECTION FRONT |
| BREAKS BEFORE MAKES 2ND SECTION FRONT |
| SWITCH ACTUATOR POSITIONING INCREMENT | 22.5 DEGREES SINGLE ACTUATOR |
| SWITCH ACTUATOR STOP DEVICE TYPE | ADJUSTABLE STOP SINGLE ACTUATOR |
| SHAFT TYPE | ROUND, FLATTED SINGLE ACTUATOR |
| FIRST FLAT LENGTH | 0.250 INCHES NOMINAL SINGLE ACTUATOR |
| FLAT HEIGHT | 0.218 INCHES NOMINAL SINGLE ACTUATOR |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL SINGLE ACTUATOR |
| SHAFT LENGTH | 0.750 INCHES NOMINAL SINGLE ACTUATOR |
| NONTURN DEVICE TYPE | TAB AT 12:00 O'CLOCK |
| NONTURN DEVICE RADIUS | 0.531 INCHES NOMINAL AT 12:00 O'CLOCK |
| MOUNTING METHOD | THREADED BUSHING SINGLE MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNEF SINGLE MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.375 INCHES SINGLE MOUNTING FACILITY |
| THREAD LENGTH | 0.312 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| TEST DATA DOCUMENT | 81349-MIL-S-3786 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SHAFT FLAT/SLOT ANGULAR LOCATION | 90.0 DEGREES FROM CONTACT POSITION 1 SINGLE ACTUATOR |
| OPERATING TEMP RANGE | -65.0 TO 125.0 DEG CELSIUS |
| DETENT ROTATIONAL TORQUE RANGE | 1.500 TO 6.000 INCH-POUNDS SINGLE ACTUATOR |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 10001 |
| DESIGN CONTROL REFERENCE | 2682682-2 |