| BODY LENGTH | 3.000 INCHES NOMINAL |
| CONTACT ACTION STIMULUS | INCREASE |
| CONTACT ADJUSTABILITY | DEACTUATION POINT NOT ADJUSTABLE AND ACTUATION POINT NOT ADJUSTABLE |
| CONTACT LOAD CURRENT RATING | 2.0 AMPERES INDUCTIVE LOAD SINGLE VOLTAGE |
| CONTACT STIMULUS RATING | 5.00 ACTUATION POINT NOMINAL POUNDS PER SQUARE INCH GAGE AND 4.00 DEACTUATION POINT NOMINAL POUNDS PER SQUARE INCH GAGE AND 1.00 DIFFERENTIAL POINT NOMINAL POUNDS PER SQUARE INCH GAGE |
| CONTACT VOLTAGE RATING IN VOLTS | 28.0 DC AT SEA LEVEL SINGLE VOLTAGE |
| DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 3.000 INCHES NOMINAL |
| FEATURES PROVIDED | HERMETICALLY SEALED CASE |
| HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | MOISTURE PROOF |
| INSIDE DIAMETER | 0.437 INCHES NOMINAL SINGLE CONNECTION |
| OVERALL HEIGHT | 2.370 INCHES NOMINAL |
| OVERALL LENGTH | 3.750 INCHES NOMINAL |
| OVERALL WIDTH | 3.540 INCHES NOMINAL |
| MEDIA FOR WHICH DESIGNED | GAS |
| MOUNTING FACILITY PATTERN | TWO POSITION IN-LINE |
| MOUNTING METHOD | BRACKET AND UNTHREADED HOLE |
| NOMINAL THREAD SIZE | 0.4375 INCHES SINGLE PRESSURE CONNECTION |
| NONPILE-UP CONTACT ARRANGEMENT | 1 POLE, DOUBLE THROW, ONE POSITION MOMENTARY |
| OPERATING TEMP RATING | -10.0 CELSIUS MINIMUM AND 60.0 CELSIUS MAXIMUM |
| PRESSURE CONNECTOR TYPE | PLAIN, THREADED INTERNAL SINGLE CONNECTION |
| PRESSURE SWITCH TYPE | GAGE |
| PROOF PRESSURE | 15.00 POUNDS PER SQUARE INCH |
| STYLE DESIGNATOR | CYLINDRICAL W/MOUNTING LUGS |
| TERMINAL TYPE | CONNECTOR, RECEPTACLE |
| TEST DATA DOCUMENT | 96906-MIL-STD-202 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD CLASS | 3B SINGLE PRESSURE CONNECTION |
| THREAD SERIES DESIGNATOR | UNF SINGLE PRESSURE CONNECTION |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.210 INCHES NOMINAL |