| CONTACT VOLTAGE RATING IN VOLTS | 110.0 AC AT SEA LEVEL |
| 28.0 DC AT SEA LEVEL |
| CONTACT LOAD CURRENT RATING | 500.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| 1.0 AMPERES RESISTIVE LOAD DC AT SEA LEVEL |
| TERMINAL TYPE | TAB, SOLDER LUG |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 8 1ST ACTUATOR |
| STYLE DESIGNATOR | CIRCULAR WAFER, BUSHING MOUNT |
| OVERALL LENGTH | 4.281 INCHES NOMINAL |
| OVERALL HEIGHT | 1.281 INCHES MAXIMUM |
| OVERALL WIDTH | 1.281 INCHES MAXIMUM |
| INDIVIDUAL SECTION QUANTITY | 3 |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| POLE QUANTITY | 1 1ST SECTION FRONT |
| 1 2ND SECTION FRONT |
| 1 3RD SECTION REAR |
| THROW QUANTITY | 8 1ST SECTION FRONT |
| 8 2ND SECTION FRONT |
| 8 3RD SECTION REAR |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES 1ST SECTION FRONT |
| BREAKS BEFORE MAKES 2ND SECTION FRONT |
| BREAKS BEFORE MAKES 3RD SECTION REAR |
| SWITCH ACTUATOR POSITIONING INCREMENT | 30.0 DEGREES 1ST ACTUATOR |
| SWITCH ACTUATOR STOP DEVICE TYPE | FIXED STOP 1ST ACTUATOR |
| SHAFT TYPE | ROUND, HOLLOWED 1ST ACTUATOR |
| ROUND 2ND ACTUATOR |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL 1ST ACTUATOR |
| 0.125 INCHES NOMINAL 2ND ACTUATOR |
| SHAFT LENGTH | 0.475 INCHES NOMINAL 1ST ACTUATOR |
| 0.850 INCHES NOMINAL 2ND ACTUATOR |
| NONTURN DEVICE TYPE | TAB AT 9:00 O'CLOCK |
| NONTURN DEVICE RADIUS | 0.531 INCHES NOMINAL AT 9:00 O'CLOCK |
| MOUNTING METHOD | THREADED BUSHING SINGLE MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNEF SINGLE MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.375 INCHES SINGLE MOUNTING FACILITY |
| THREAD CLASS | 2A SINGLE MOUNTING FACILITY |
| THREAD LENGTH | 0.375 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| FEATURES PROVIDED | VARIABLE RESISTOR |
| PRECIOUS MATERIAL | SILVER |
| PRECIOUS MATERIAL AND LOCATION | PLATED ROTOR CONTACTS AND PLATED STATOR CONTACTS SILVER |
| SPECIAL FEATURES | DO NOT USE 2 PIECE SHAFT ON POTENTIOMETER USE KNURL AND PRESS FIT |