| CONTACT VOLTAGE RATING IN VOLTS | 115.0 AC AT ALTITUDE |
| 28.0 DC AT SEA LEVEL |
| 28.0 DC AT ALTITUDE |
| 300.0 HIGHEST AC VOLTAGE RATING AT SEA LEVEL |
| 115.0 LOWEST AC VOLTAGE RATING AT SEA LEVEL |
| CONTACT LOAD CURRENT RATING | 100.0 MILLIAMPERES RESISTIVE LOAD AC AT ALTITUDE |
| 500.0 MILLIAMPERES RESISTIVE LOAD AND |
| 50.0 MILLIAMPERES INDUCTIVE LOAD DC AT SEA LEVEL |
| 350.0 MILLIAMPERES RESISTIVE LOAD DC AT ALTITUDE |
| 50.0 MILLIAMPERES RESISTIVE LOAD HIGHEST AC VOLTAGE RATING AT SEA LEVEL |
| 250.0 MILLIAMPERES RESISTIVE LOAD LOWEST AC VOLTAGE RATING AT SEA LEVEL |
| TERMINAL TYPE | TAB, SOLDER LUG |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 14 1ST ACTUATOR |
| STYLE DESIGNATOR | CIRCULAR WAFER, BUSHING MOUNT |
| OVERALL LENGTH | 5.135 INCHES NOMINAL |
| OVERALL HEIGHT | 1.891 INCHES NOMINAL |
| OVERALL WIDTH | 1.750 INCHES NOMINAL |
| INDIVIDUAL SECTION QUANTITY | 3 |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| POLE QUANTITY | 1 EACH SECTION REAR |
| THROW QUANTITY | 14 EACH SECTION REAR |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES EACH SECTION REAR |
| SWITCH ACTUATOR POSITIONING INCREMENT | 20.0 DEGREES 1ST ACTUATOR |
| SWITCH ACTUATOR MOMENTARY POSITION | CLOCKWISE 1ST ACTUATOR |
| SWITCH ACTUATOR STOP DEVICE TYPE | FIXED STOP 1ST ACTUATOR |
| SHAFT TYPE | ROUND, HOLLOWED, FLATTED 1ST ACTUATOR |
| ROUND, FLATTED 2ND ACTUATOR |
| FIRST FLAT LENGTH | 0.280 INCHES NOMINAL 1ST ACTUATOR |
| 0.310 INCHES NOMINAL 2ND ACTUATOR |
| FLAT HEIGHT | 0.216 INCHES NOMINAL 1ST ACTUATOR |
| 0.093 INCHES NOMINAL 2ND ACTUATOR |
| SHAFT DIAMETER | 0.495 INCHES NOMINAL 2ND ACTUATOR |
| SHAFT LENGTH | 0.570 INCHES NOMINAL 1ST ACTUATOR |
| NONTURN DEVICE TYPE | FLATTED BUSHING AT 12:00 O'CLOCK |
| MOUNTING METHOD | THREADED BUSHING 1ST MOUNTING FACILITY |
| BRACKET AND |
| UNTHREADED HOLE 2ND MOUNTING FACILITY |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.130 INCHES MINIMUM AND |
| 0.136 INCHES MAXIMUM 2ND MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNEF 1ST MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.375 INCHES 1ST MOUNTING FACILITY |
| THREAD CLASS | 2A 1ST MOUNTING FACILITY |
| THREAD LENGTH | 0.310 INCHES NOMINAL 1ST MOUNTING FACILITY |
| MOUNTING FACILITY PATTERN | FOUR POSITION DIAMOND 2ND MOUNTING FACILITY |
| LONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS | 2.375 INCHES NOMINAL 2ND MOUNTING FACILITY |
| SHORTEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS | 1.188 INCHES NOMINAL 2ND MOUNTING FACILITY |
| LONGEST VERTICAL DISTANCE BETWEEN MOUNTING CENTERS | 1.560 INCHES NOMINAL 2ND MOUNTING FACILITY |
| SHORTEST VERTICAL DISTANCE BETWEEN MOUNTING CENTERS | 0.780 INCHES NOMINAL 2ND MOUNTING FACILITY |
| FEATURES PROVIDED | VARIABLE RESISTOR |
| OPERATING TEMP RANGE | -65.0 TO 125.0 DEG CELSIUS |
| DETENT ROTATIONAL TORQUE RANGE | 25.000 TO 45.000 INCH-OUNCES SINGLE ACTUATOR |
| PRECIOUS MATERIAL | GOLD |
| PRECIOUS MATERIAL AND LOCATION | CONTACTS AND TERMINAL SURFACES GOLD |
| SPECIAL FEATURES | DUMMY TERMINALS LOCATED AT POS. 15,16,AND 17,ALL SECTIONS,INNER SHAFT OPERATES VARIABLE RESISTOR |