| STYLE DESIGNATOR | RECTANGULAR |
| OVERALL LENGTH | 4.938 INCHES NOMINAL |
| OVERALL HEIGHT | 5.125 INCHES NOMINAL |
| OVERALL WIDTH | 3.875 INCHES NOMINAL |
| BODY HEIGHT | 3.281 INCHES NOMINAL |
| PRESSURE SWITCH TYPE | GAGE |
| NONPILE-UP CONTACT ARRANGEMENT | 1 POLE, SINGLE THROW, NORMALLY CLOSED, MOMENTARY ACTION |
| CONTACT ACTION STIMULUS | INCREASE |
| CONTACT ADJUSTABILITY | DEACTUATION POINT NOT ADJUSTABLE AND |
| ACTUATION POINT ADJUSTABLE |
| CONTACT ADJUSTMENT RANGE | 1.00 TO 15.00 ACTUATION POINT POUNDS PER SQUARE INCH GAGE |
| CONTACT ADJUSTMENT TYPE | EXTERNAL ACTUATION POINT SCREW |
| CONTACT STIMULUS RATING | 13.75 DEACTUATION POINT NOMINAL POUNDS PER SQUARE INCH GAGE AND |
| 1.25 DIFFERENTIAL POINT NOMINAL POUNDS PER SQUARE INCH GAGE |
| CONTACT VOLTAGE RATING IN VOLTS | 115.0 AC AT SEA LEVEL SINGLE VOLTAGE |
| FREQUENCY IN HERTZ | 400.0 SINGLE VOLTAGE |
| CONTACT LOAD CURRENT RATING | 4.0 AMPERES RESISTIVE LOAD SINGLE VOLTAGE |
| MEDIA FOR WHICH DESIGNED | GAS OR |
| LIQUID |
| PRESSURE CONNECTOR TYPE | GASKET SEAL, THREADED EXTERNAL SINGLE CONNECTION |
| OUTSIDE DIAMETER | 0.375 INCHES NOMINAL SINGLE CONNECTION |
| TERMINAL TYPE | SCREW |
| MOUNTING METHOD | BASE |
| THREAD SERIES DESIGNATOR | NPT SINGLE PRESSURE CONNECTION |
| NOMINAL THREAD SIZE | 0.375 INCHES SINGLE PRESSURE CONNECTION |
| THREAD CLASS | 3A SINGLE PRESSURE CONNECTION |
| THREAD QUANTITY PER INCH | 18 SINGLE PRESSURE CONNECTION |
| SPECIAL FEATURES | WATERTIGHT CASE |
| TEST DATA DOCUMENT | 81349-MILS16032 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 81349 |
| DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | IC/L2D |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-S-16032 |