| CONTACT VOLTAGE RATING IN VOLTS | 125.0 AC AT SEA LEVEL |
| CONTACT LOAD CURRENT RATING | 10.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| TERMINAL TYPE | TAB W/SCREW |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 8 SINGLE ACTUATOR |
| STYLE DESIGNATOR | TAP, CIRCUIT SELECTOR |
| OVERALL LENGTH | 12.616 INCHES NOMINAL |
| OVERALL HEIGHT | 8.000 INCHES NOMINAL |
| OVERALL WIDTH | 8.000 INCHES NOMINAL |
| INDIVIDUAL SECTION QUANTITY | 10 |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| POLE QUANTITY | 2 EACH SECTION FRONT |
| THROW QUANTITY | 8 EACH SECTION FRONT |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES EACH SECTION FRONT |
| SWITCH ACTUATOR POSITIONING INCREMENT | 45.0 DEGREES SINGLE ACTUATOR |
| SWITCH ACTUATOR STOP DEVICE TYPE | ADJUSTABLE STOP SINGLE ACTUATOR |
| SHAFT TYPE | ROUND, SQUARE SINGLE ACTUATOR |
| FIRST FLAT LENGTH | 0.866 INCHES NOMINAL SINGLE ACTUATOR |
| SHAFT DIAMETER | 0.625 INCHES NOMINAL SINGLE ACTUATOR |
| SHAFT LENGTH | 1.304 INCHES NOMINAL SINGLE ACTUATOR |
| SQUARE SHAFT SIZE | 0.375 INCHES NOMINAL SINGLE ACTUATOR |
| MOUNTING METHOD | BRACKET AND |
| THREADED HOLE SINGLE MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNC SINGLE MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.190 INCHES SINGLE MOUNTING FACILITY |
| THREAD CLASS | 2B SINGLE MOUNTING FACILITY |
| THREAD QUANTITY PER INCH | 24 SINGLE MOUNTING FACILITY |
| MOUNTING FACILITY PATTERN | FOUR POSITION CIRCULAR SINGLE MOUNTING FACILITY |
| MOUNTING FACILITY CIRCLE RADIUS | 7.000 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| FEATURES PROVIDED | ACTUATOR KNOB AND |
| METALLIC INCLOSURE |
| TEST DATA DOCUMENT | 80064-9-S-5568-L DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | WATERTIGHT |
| KNOB MANUFACTURER CODE | 80064 |
| KNOB MANUFACTURER PART NUMBER | 9-S-5564-L-19 |
| SHAFT FLAT/SLOT ANGULAR LOCATION | 22.5 DEGREES FROM CONTACT POSITION 1 SINGLE ACTUATOR |
| SPECIAL FEATURES | 6-32 THREADED HOLE LOCATED ON VERTICAL AXIS OF SHAFT |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 81349 |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MILS15743 |
| DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | S2JR10-3B |