|
|
|
National Stock Number:
5930-00-350-3871
Federal Supply Class:
5930
National Item Identification Number:
003503871
Description:
SWITCH,PUSH
Detail:
A switch that is externally actuated by a device such as a push rod or button, which requires pushing for each actuation. The action may be momentary, with mechanical return. The actuating device may or may not be an integral part of the switch. The item may include provisions for mounting indicating lamp(s) or light emitting diode(s) in the actuator. Includes items consisting of individually separable switches that are physically interlocked, that have a common actuator, or are electrically connected. Excludes LIGHT-SWITCH; LIGHT-SWITCH ASSEMBLY; SWITCH, BEAM SELECTING, HEADLIGHT; SWITCH, FOOT; SWITCH, INTERLOCK; SWITCH, PRESSURE; SWITCH, PUSH-PULL; SWITCH, SENSITIVE and SWITCH ASSEMBLY. For devices which start, stop, reverse, select and/or regulate the speed of a motor, see STARTER, MOTOR and CONTROLLER, MOTOR.
|
Manufacturer Information:
| 1996466 | 16764 | GENERAL MOTORS CORP DELCO REMY DIV | | 228C1-0027 | 02032 | HOLLINGSWORTH JOHN R CO | | 6200102 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | M13625/1-1 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | 5930003503871 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 5930003503871 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | MIL-DTL-13625/1 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-DTL-13625/1-1 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-DTL-13625/1B | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-S-13625/1 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-S-13625/1-1 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS27199-1 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| ACTUATOR DIAMETER | 1.000 INCHES NOMINAL | | ACTUATOR HEIGHT | 1.900 INCHES MINIMUM AND 2.050 INCHES MAXIMUM | | ACTUATOR STYLE | ROUND | | BODY DIAMETER | 2.660 INCHES NOMINAL | | BODY HEIGHT | 1.470 INCHES MINIMUM AND 1.600 INCHES MAXIMUM | | BODY STYLE | HOLE MOUNT | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO DIAMETER | 1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM | | CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | 300.000 AMPERES RESISTIVE DC AND 150.000 AMPERES INDUCTIVE DC | | INCLOSURE TYPE | FULLY INCLOSED | | MAXIMUM VOLTAGE RATING IN VOLTS | 24.0 DC | | MOUNTING METHOD | UNTHREADED HOLE | | NONPILE-UP CONTACT ARRANGEMENT | 1 POLE, SINGLE THROW, NORMALLY OPEN, DOUBLE MAKE, MOMENTARY ACTION SINGLE SWITCH UNIT | | PRECIOUS MATERIAL AND LOCATION | CONTACTS SILVER | | SPECIFICATION/STANDARD DATA | 81349-MIL-S-13625/1 GOVERNMENT STANDARD | | TERMINAL TYPE AND QUANTITY | 2 THREADED STUD | | TEST DATA DOCUMENT | 81349-MIL-S-13625 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | UNTHREADED MOUNTING HOLE DIAMETER | 1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM |
|
|