| MAXIMUM VOLTAGE RATING IN VOLTS | 28.0 DC |
| CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | 10.000 AMPERES RESISTIVE DC AND |
| 6.000 AMPERES INDUCTIVE DC AND |
| 6.000 AMPERES MOTOR DC |
| BODY STYLE | BUSHING MOUNTED |
| ACTUATOR STYLE | ROLLER ARM |
| MOUNTING METHOD | THREADED BUSHING |
| INCLOSURE TYPE | FULLY INCLOSED |
| TERMINAL TYPE AND QUANTITY | 6 WIRE LEAD |
| NONPILE-UP CONTACT ARRANGEMENT | 2 POLE, DOUBLE THROW, ONE POSITION MOMENTARY SINGLE SWITCH UNIT |
| BODY DIAMETER | 1.480 INCHES MINIMUM AND |
| 1.520 INCHES MAXIMUM |
| BUSHING LENGTH | 0.320 INCHES MINIMUM AND |
| 0.360 INCHES MAXIMUM |
| BODY LENGTH | 2.800 INCHES MINIMUM AND |
| 2.840 INCHES MAXIMUM |
| ACTUATOR LENGTH | 1.480 INCHES MINIMUM AND |
| 1.520 INCHES MAXIMUM |
| ACTUATOR HEIGHT | 0.927 INCHES MINIMUM AND |
| 0.967 INCHES MAXIMUM |
| ACTUATOR ROLLER DIAMETER | 0.730 INCHES MINIMUM AND |
| 0.770 INCHES MAXIMUM |
| ACTUATOR ROLLER WIDTH | 0.290 INCHES MINIMUM AND |
| 0.330 INCHES MAXIMUM |
| SWITCH ACTUATING FORCE | 192.0 INCH-OUNCES MINIMUM AND |
| 400.0 INCH-OUNCES MAXIMUM |
| SWITCH RELEASE FORCE | 64.0 INCH-OUNCES MINIMUM |
| HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | WATERTIGHT |
| THREAD SERIES DESIGNATOR | UNS |
| NOMINAL THREAD SIZE | 0.469 INCHES |
| THREAD QUANTITY PER INCH | 32 |
| TEST DATA DOCUMENT | 81349-MILS8805 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 81349 |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-PRF-8805/48 |
| DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MS21320-3 |