| BODY DIAMETER | 0.640 INCHES MAXIMUM |
| BODY HEIGHT | 0.364 INCHES NOMINAL |
| CONTACT ACTION STIMULUS | INCREASE |
| CONTACT ADJUSTABILITY | DEACTUATION POINT NOT ADJUSTABLE AND ACTUATION POINT NOT ADJUSTABLE |
| CONTACT LOAD CURRENT RATING | 2.0 AMPERES RESISTIVE LOAD AND 1.0 AMPERES INDUCTIVE LOAD AND 500.0 MILLIAMPERES LAMP LOAD FIRST VOLTAGE |
| CONTACT LOAD CURRENT RATING | 2.5 AMPERES INDUCTIVE LOAD THIRD VOLTAGE |
| CONTACT LOAD CURRENT RATING | 5.0 AMPERES RESISTIVE LOAD AND 2.5 AMPERES INDUCTIVE LOAD AND 1.0 AMPERES LAMP LOAD SECOND VOLTAGE |
| CONTACT STIMULUS RATING | 126.00 ACTUATION POINT MINIMUM DEGREES FAHRENHEIT AND 136.00 ACTUATION POINT MAXIMUM DEGREES FAHRENHEIT AND 111.00 DEACTUATION POINT MINIMUM DEGREES FAHRENHEIT AND 121.00 DEACTUATION POINT MAXIMUM DEGREES FAHRENHEIT AND 15.00 DIFFERENTIAL POINT NOMINAL DEGREES FAHRENHEIT |
| CONTACT VOLTAGE RATING IN VOLTS | 115.0 AC AT SEA LEVEL FIRST VOLTAGE |
| CONTACT VOLTAGE RATING IN VOLTS | 28.0 DC AT SEA LEVEL SECOND VOLTAGE |
| CONTACT VOLTAGE RATING IN VOLTS | 28.0 DC AT ALTITUDE THIRD VOLTAGE |
| DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 0.930 INCHES MINIMUM AND 0.944 INCHES MAXIMUM |
| FEATURES PROVIDED | HERMETICALLY SEALED CASE |
| FREQUENCY IN HERTZ | 60.0 SINGLE VOLTAGE |
| OVERALL HEIGHT | 0.641 INCHES MINIMUM AND 0.671 INCHES MAXIMUM |
| OVERALL LENGTH | 1.220 INCHES NOMINAL |
| MEDIA FOR WHICH DESIGNED | GAS OR LIQUID |
| MOUNTING FACILITY PATTERN | TWO POSITION IN-LINE |
| MOUNTING METHOD | BRACKET AND SLOT AND UNTHREADED HOLE |
| MOUNTING SLOT WIDTH | 0.133 INCHES MINIMUM AND 0.147 INCHES MAXIMUM |
| NONPILE-UP CONTACT ARRANGEMENT | 1 POLE, SINGLE THROW, NORMALLY OPEN, MOMENTARY ACTION |
| OPERATING TEMP RATING | 260.0 CELSIUS MAXIMUM AND -54.0 CELSIUS MINIMUM |
| STYLE DESIGNATOR | DISC W/FLANGE |
| TEMP SENSING ELEMENT TYPE | INTERNAL SENSOR |
| TERMINAL TYPE | TAB, SOLDER LUG |
| TEST DATA DOCUMENT | 81349-MIL-S-24236 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.133 INCHES MINIMUM AND 0.147 INCHES MAXIMUM |