| STYLE DESIGNATOR | CYLINDRICAL W/MOUNTING LUGS |
| OVERALL LENGTH | 2.870 INCHES MAXIMUM |
| OVERALL WIDTH | 1.939 INCHES NOMINAL |
| BODY DIAMETER | 0.994 INCHES MINIMUM AND |
| 0.996 INCHES MAXIMUM |
| BODY LENGTH | 1.162 INCHES MAXIMUM |
| PRESSURE SWITCH TYPE | GAGE |
| NONPILE-UP CONTACT ARRANGEMENT | 1 POLE, SINGLE THROW, NORMALLY OPEN, MOMENTARY ACTION |
| CONTACT ACTION STIMULUS | INCREASE |
| CONTACT ADJUSTABILITY | DEACTUATION POINT NOT ADJUSTABLE AND |
| ACTUATION POINT NOT ADJUSTABLE |
| CONTACT STIMULUS RATING | 150.00 ACTUATION POINT NOMINAL POUNDS PER SQUARE INCH AND |
| 50.00 DEACTUATION POINT NOMINAL POUNDS PER SQUARE INCH |
| CONTACT VOLTAGE RATING IN VOLTS | 28.0 DC AT SEA LEVEL SINGLE VOLTAGE |
| CONTACT LOAD CURRENT RATING | 10.0 AMPERES RESISTIVE LOAD AND |
| 10.0 AMPERES INDUCTIVE LOAD AND |
| 5.0 AMPERES LAMP LOAD SINGLE VOLTAGE |
| OPERATING TEMP RATING | -53.9 DEG CELSIUS MINIMUM AND |
| 176.6 DEG CELSIUS MAXIMUM |
| MEDIA FOR WHICH DESIGNED | LIQUID |
| PROOF PRESSURE | 800.00 POUNDS PER SQUARE INCH |
| PRESSURE CONNECTOR TYPE | GROOVED, UNTHREADED EXTERNAL SINGLE CONNECTION |
| OUTSIDE DIAMETER | 0.431 INCHES MINIMUM AND |
| 0.433 INCHES MAXIMUM SINGLE CONNECTION |
| TERMINAL TYPE | CONNECTOR, RECEPTACLE |
| MOUNTING METHOD | UNTHREADED HOLE |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.219 INCHES NOMINAL |
| MOUNTING FACILITY PATTERN | TWO POSITION IN-LINE |
| DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 1.521 INCHES MINIMUM AND |
| 1.541 INCHES MAXIMUM |
| TEST DATA DOCUMENT | 81349-MIL-S-9395 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPECIFICATION/STANDARD DATA | 81349-MIL-S-9395/10 GOVERNMENT SPECIFICATION |
| SENSING ELEMENT BURST PRESSURE | 1200.00 POUNDS PER SQUARE INCH |
| SPEC/STD CONTROLLING DATA | |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-DTL-9395/10 |
| MANUFACTURERS CODE | 81349 |
| DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | M9395/10-DR1FA |