|
|
|
National Stock Number:
5930-00-644-0110
Federal Supply Class:
5930
National Item Identification Number:
006440110
Description:
BOOT,DUST AND MOISTURE SEAL
Detail:
A flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| 104311 | 06351 | MICROWAVE ENGINEERING CORPORATION | | 302-5486642 ITE | 53711 | NAVAL SEA SYSTEMS COMMAND | | 588007-4 | 49956 | RAYTHEON COMPANY | | 302-5486642 PC1 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 505001-000 ITEM | 60347 | PHILLIPS RESEARCH CORP | | 38634 | 98675 | ESPEY MFG. & ELECTRONICS CORP. | | 59461-000 | 01534 | RAYTHEON COMPANY | | AED33200-1 | 07213 | HONEYWELL AEROSPATIALE INC | | G221437-2 | 64959 | AMERICAN TELEPHONE AND TELEGRAPH CO | | G221437-2 | 70408 | AT AND T CORP | | M5423-01-01BLAC | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | M5423/01-01BLACK | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-B-5423/1 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | 5930PL1380611 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | PC19-01 | 08748 | ELDEC AEROSPACE CORP | | N1030 | 0BN35 | ROSEMAN MFG CO | | PI1142-1A | 80249 | BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. | | MIL-DTL-5423/1 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MILB5423-1 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | N1030 | 97539 | APM HEXSEAL CORP |
|
Techincal Specification:
| DOME HEIGHT | 0.791 INCHES NOMINAL | | BASE THREAD LOCATION | INTERNAL | | HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | DUSTPROOF-NEMA TYPE 13 AND WATERTIGHT-NEMA TYPE 4 | | OVERALL HEIGHT | 0.844 INCHES NOMINAL | | MATERIAL THICKNESS | 0.053 INCHES NOMINAL | | MATERIAL | RUBBER SILICONE BODY | | MOUNTING DEVICE QUANTITY | 1 | | MOUNTING METHOD | INTEGRAL THREADED NUT | | NOMINAL THREAD SIZE | 0.469 INCHES | | OPENING INSIDE DIAMETER | 0.125 INCHES NOMINAL | | SEALING METHOD | COMPRESSION | | WIDTH ACROSS FLATS | 0.625 INCHES NOMINAL | | STYLE DESIGNATOR | CLOSED END | | TEST DATA DOCUMENT | 81349-MIL-B-5423 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD CLASS | 2B | | THREAD LENGTH | 0.176 INCHES NOMINAL | | THREAD SERIES | UNS | | THREAD QUANTITY PER INCH | 32 |
|
|