| CONTACT VOLTAGE RATING IN VOLTS | 125.0 AC AT SEA LEVEL |
| 28.0 DC AT SEA LEVEL |
| CONTACT LOAD CURRENT RATING | 1.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| 1.0 AMPERES INDUCTIVE LOAD DC AT SEA LEVEL |
| TERMINAL TYPE | TAB, SOLDER LUG |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 12 SINGLE ACTUATOR |
| STYLE DESIGNATOR | TAP, CIRCUIT SELECTOR |
| OVERALL HEIGHT | 1.125 INCHES NOMINAL |
| OVERALL WIDTH | 1.125 INCHES NOMINAL |
| INDIVIDUAL SECTION QUANTITY | 3 |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| POLE QUANTITY | 2 EACH SECTION FRONT |
| THROW QUANTITY | 12 EACH SECTION FRONT |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES EACH SECTION FRONT |
| SWITCH ACTUATOR POSITIONING INCREMENT | 30.0 DEGREES SINGLE ACTUATOR |
| SWITCH ACTUATOR STOP DEVICE TYPE | ADJUSTABLE STOP SINGLE ACTUATOR |
| SHAFT TYPE | ROUND, FLATTED, THREADED HOLE SINGLE ACTUATOR |
| FIRST FLAT LENGTH | 0.344 INCHES NOMINAL SINGLE ACTUATOR |
| FLAT HEIGHT | 0.219 INCHES NOMINAL SINGLE ACTUATOR |
| SHAFT DIAMETER | 0.246 INCHES NOMINAL SINGLE ACTUATOR |
| SHAFT LENGTH | 0.812 INCHES NOMINAL SINGLE ACTUATOR |
| MOUNTING METHOD | BRACKET AND |
| THREADED HOLE 1ST MOUNTING FACILITY |
| BRACKET AND |
| UNTHREADED HOLE 2ND MOUNTING FACILITY |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.095 INCHES NOMINAL 2ND MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNEF 1ST MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.375 INCHES 1ST MOUNTING FACILITY |
| THREAD CLASS | 2B 1ST MOUNTING FACILITY |
| THREAD QUANTITY PER INCH | 32 1ST MOUNTING FACILITY |
| THREAD LENGTH | 0.594 INCHES NOMINAL 1ST MOUNTING FACILITY |
| MOUNTING FACILITY PATTERN | FOUR POSITION RECTANGULAR 2ND MOUNTING FACILITY |
| LONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS | 0.625 INCHES NOMINAL 2ND MOUNTING FACILITY |
| LONGEST VERTICAL DISTANCE BETWEEN MOUNTING CENTERS | 0.625 INCHES NOMINAL 2ND MOUNTING FACILITY |
| FEATURES PROVIDED | ACTUATOR KNOB |
| TEST DATA DOCUMENT | 81349-MIL-S-21604 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | EXPLOSION PROOF |
| KNOB MANUFACTURER CODE | 80064 |
| KNOB MANUFACTURER PART NUMBER | 900S6202-74225PC7 |
| DETENT ROTATIONAL TORQUE RANGE | 0.500 TO 5.000 INCH-POUNDS SINGLE ACTUATOR |
| PRECIOUS MATERIAL | SILVER |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES SILVER |