| CONTACT VOLTAGE RATING IN VOLTS | 28.0 DC AT SEA LEVEL |
| CONTACT LOAD CURRENT RATING | 10.0 AMPERES RESISTIVE LOAD AND |
| 10.0 AMPERES INDUCTIVE LOAD AND |
| 5.0 AMPERES LAMP LOAD DC AT SEA LEVEL |
| TERMINAL TYPE | CONNECTOR, RECEPTACLE |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 2 SINGLE ACTUATOR |
| STYLE DESIGNATOR | SNAP OR LINE |
| OVERALL LENGTH | 3.520 INCHES NOMINAL |
| OVERALL DIAMETER | 1.750 INCHES NOMINAL |
| INDIVIDUAL SECTION QUANTITY | 1 |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP NONSYMMETRICAL |
| SWITCH ACTUATOR POSITIONING INCREMENT | 45.0 DEGREES SINGLE ACTUATOR |
| SHAFT TYPE | ROUND, PARALLEL FLATTED SINGLE ACTUATOR |
| WIDTH BETWEEN FLATS | 0.214 INCHES MINIMUM AND |
| 0.217 INCHES MAXIMUM SINGLE ACTUATOR |
| FIRST FLAT LENGTH | 0.190 INCHES NOMINAL SINGLE ACTUATOR |
| SHAFT DIAMETER | 0.310 INCHES MINIMUM AND |
| 0.314 INCHES MAXIMUM SINGLE ACTUATOR |
| SHAFT LENGTH | 0.380 INCHES NOMINAL SINGLE ACTUATOR |
| NONTURN DEVICE TYPE | TAB AT 3:00 O'CLOCK |
| NONTURN DEVICE RADIUS | 0.625 INCHES NOMINAL AT 3:00 O'CLOCK |
| MOUNTING METHOD | THREADED BUSHING SINGLE MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNF SINGLE MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.500 INCHES SINGLE MOUNTING FACILITY |
| THREAD CLASS | 2A SINGLE MOUNTING FACILITY |
| THREAD LENGTH | 0.560 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| TEST DATA DOCUMENT | 81349-MIL-S-13623 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | WATERTIGHT |
| SPECIAL FEATURES | THREADED HOLE IN SHAFT |
| SPECIFICATION/STANDARD DATA | 96906-MS39060 GOVERNMENT STANDARD |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 81349 |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-DTL-13623/1 |
| DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-DTL-13623/1-2 |