| CONTACT LOAD CURRENT RATING | 2.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES EACH SECTION PERIPHERY |
| CONTACT VOLTAGE RATING IN VOLTS | 118.0 AC AT SEA LEVEL |
| FIRST FLAT LENGTH | 0.560 INCHES NOMINAL SINGLE ACTUATOR |
| INDIVIDUAL SECTION QUANTITY | 2 |
| LONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS | 1.500 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| OVERALL HEIGHT | 2.250 INCHES NOMINAL |
| OVERALL LENGTH | 5.780 INCHES NOMINAL |
| OVERALL WIDTH | 2.570 INCHES MAXIMUM |
| MOUNTING FACILITY PATTERN | TWO POSITION IN-LINE SINGLE MOUNTING FACILITY |
| MOUNTING METHOD | BRACKET AND THREADED HOLE SINGLE MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.164 INCHES SINGLE MOUNTING FACILITY |
| POLE QUANTITY | 2 EACH SECTION PERIPHERY |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL SINGLE ACTUATOR |
| SHAFT LENGTH | 2.750 INCHES NOMINAL SINGLE ACTUATOR |
| SHAFT TYPE | ROUND, V FLATTED SINGLE ACTUATOR |
| SPECIAL FEATURES | CROSSTALK SHALL NOT EXCEED 40DB DOWN WITH 2000 OHMS BETWEEN TERMINALS AND GROUND AND A 2V RMS 2 KC SIGNAL APPLIED TO ANY TERMINAL |
| STYLE DESIGNATOR | TAP, SQUARE FRAME |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 3 SINGLE ACTUATOR |
| SWITCH ACTUATOR STOP DEVICE TYPE | FIXED STOP SINGLE ACTUATOR |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| TERMINAL TYPE | TURRET |
| THREAD CLASS | 2B SINGLE MOUNTING FACILITY |
| THREAD QUANTITY PER INCH | 32 SINGLE MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNC SINGLE MOUNTING FACILITY |
| THROW QUANTITY | 3 EACH SECTION PERIPHERY |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.164 INCHES NOMINAL SINGLE MOUNTING FACILITY |