| CONTACT LOAD CURRENT RATING | 2.0 AMPERES RESISTIVE LOAD DC AT SEA LEVEL |
| CONTACT LOAD CURRENT RATING | 1.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES EACH SECTION FRONT |
| CONTACT VOLTAGE RATING IN VOLTS | 110.0 AC AT SEA LEVEL |
| CONTACT VOLTAGE RATING IN VOLTS | 28.0 DC AT SEA LEVEL |
| FIRST FLAT LENGTH | 0.250 INCHES NOMINAL SINGLE ACTUATOR |
| FLAT HEIGHT | 0.218 INCHES NOMINAL SINGLE ACTUATOR |
| INDIVIDUAL SECTION QUANTITY | 10 |
| OVERALL HEIGHT | 1.875 INCHES NOMINAL |
| OVERALL LENGTH | 7.438 INCHES NOMINAL |
| OVERALL WIDTH | 1.453 INCHES NOMINAL |
| MOUNTING METHOD | THREADED BUSHING 1ST MOUNTING FACILITY |
| MOUNTING METHOD | THREADED STUD 2ND MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.375 INCHES 1ST MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.112 INCHES 2ND MOUNTING FACILITY |
| NONTURN DEVICE RADIUS | 0.531 INCHES NOMINAL AT 3:00 O'CLOCK |
| NONTURN DEVICE TYPE | TAB AT 3:00 O'CLOCK |
| OPERATING TEMP RANGE | -65.0 TO 85.0 CELSIUS |
| POLE QUANTITY | 1 EACH SECTION FRONT |
| PRECIOUS MATERIAL AND LOCATION | CLIPS AND ROTORS SILVER |
| PRECIOUS MATERIAL | SILVER |
| SHAFT FLAT/SLOT ANGULAR LOCATION | 214.5 DEGREES FROM NONTURN DEVICE SINGLE ACTUATOR |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL SINGLE ACTUATOR |
| SHAFT TYPE | ROUND, FLATTED SINGLE ACTUATOR |
| SHAFT LENGTH | 0.563 INCHES NOMINAL SINGLE ACTUATOR |
| STYLE DESIGNATOR | CIRCULAR WAFER, BUSHING MOUNT |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 12 SINGLE ACTUATOR |
| SWITCH ACTUATOR POSITIONING INCREMENT | 30.0 DEGREES SINGLE ACTUATOR |
| SWITCH ACTUATOR STOP DEVICE TYPE | FIXED STOP SINGLE ACTUATOR |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| TERMINAL TYPE | CLIP |
| THREAD CLASS | 2A 1ST MOUNTING FACILITY |
| THREAD CLASS | 2A 2ND MOUNTING FACILITY |
| THREAD LENGTH | 0.375 INCHES NOMINAL 1ST MOUNTING FACILITY |
| THREAD LENGTH | 0.250 INCHES NOMINAL 2ND MOUNTING FACILITY |
| THREAD QUANTITY PER INCH | 40 2ND MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNC 2ND MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNEF 1ST MOUNTING FACILITY |
| THROW QUANTITY | 11 EACH SECTION FRONT |