|
|
|
National Stock Number:
5930-00-892-9026
Federal Supply Class:
5930
National Item Identification Number:
008929026
Description:
BOOT,DUST AND MOISTURE SEAL
Detail:
A flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| 10164106 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 13129-2 | 00638 | TRIO LABORATORIES INC | | 1677367-1 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 1677367PC1 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 5930008929026 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 5800748-41-009 | C0426 | HENSOLDT SENSORS GMBH | | 9033755 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | H4334SILIC0NE | 49673 | DOWTY RFL INDUSTRIES INC | | 752639-1REVG | 56232 | LOCKHEED MARTIN CORPORATION | | M5423/09-03 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | M5423-09-03 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | 5930PL1335392 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | M5423109-03 | 91145 | FLEET READINESS CENTER SOUTHWEST | | M5423-09-03 | 97539 | APM HEXSEAL CORP | | PL1885769 IT. 2 | 03956 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | PL1976054 IT. 6 | 03956 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | SMB541046-1 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR | | MIL-DTL-5423/09 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-DTL-5423/9 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MILB5423-9 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MILB5423-9TYCSZ4 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MILB5423-9TYPECS | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | N9040 1-8 | 97539 | APM HEXSEAL CORP | | N9040-1-8 | 97539 | APM HEXSEAL CORP | | N9040X1-8 | 97539 | APM HEXSEAL CORP | | N96040 1-8 | 97539 | APM HEXSEAL CORP |
|
Techincal Specification:
| BASE INSIDE DIAMETER | 0.250 INCHES NOMINAL | | BASE THREAD LOCATION | INTERNAL | | HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | DUSTTIGHT-NEMA TYPE 5 AND WATERTIGHT-NEMA TYPE 4 | | OVERALL HEIGHT | 0.239 INCHES NOMINAL | | MATERIAL | RUBBER SILICONE BODY | | MOUNTING DEVICE QUANTITY | 1 | | MOUNTING METHOD | INTEGRAL THREADED NUT | | NOMINAL THREAD SIZE | 0.250 INCHES | | OPENING INSIDE DIAMETER | 0.125 INCHES NOMINAL | | SPECIAL FEATURES | FSC CHG PER DOUGLAS COMPTON | | STYLE DESIGNATOR | THRU-HOLE | | WIDTH ACROSS FLATS | 0.375 INCHES NOMINAL | | TEST DATA DOCUMENT | 81349-MIL-B-5423 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD LENGTH | 0.175 INCHES NOMINAL | | THREAD CLASS | 2B | | THREAD SERIES | UNEF | | THREAD QUANTITY PER INCH | 32 |
|
|