|
|
|
National Stock Number:
5930-00-938-5988
Federal Supply Class:
5930
National Item Identification Number:
009385988
Description:
SWITCH,SENSITIVE
Detail:
A switch with a quick-acting mechanism designed to be actuated by a highly delicate, small movement having a definite rating of travel and mechanical pressure. Excludes SWITCH, MERCURY.
|
Manufacturer Information:
| 10135298 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 10393571-201 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | 8434153 | 19204 | ARMY, UNITED STATES DEPARTMENT OF THE | | 1SE3 | 91929 | HONEYWELL INTERNATIONAL INC. | | 1SE3 | F3767 | SEF INDUSTRIE | | 1SE3 | R1120 | SATAIR A/S | | 9099617 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | ISE3 | 91929 | HONEYWELL INTERNATIONAL INC. | | A48 | S0596 | WASCATOR AB |
|
Techincal Specification:
| ACTUATOR DIAMETER | 0.078 INCHES NOMINAL | | ACTUATOR FREE POSITION HEIGHT | 0.425 INCHES NOMINAL | | ACTUATOR MOVEMENT | 0.050 PRETRAVEL INCHES MAXIMUM AND 0.003 OVERTRAVEL INCHES MINIMUM AND 0.004 DIFFERENTIAL INCHES MAXIMUM | | ACTUATOR STYLE | ROUND | | BODY HEIGHT | 0.600 INCHES NOMINAL | | BODY LENGTH | 0.876 INCHES NOMINAL | | BODY STYLE | HOLE MOUNTED | | BODY WIDTH | 0.346 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 0.296 INCHES NOMINAL | | CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | 4.000 AMPERES RESISTIVE DC AND 3.000 AMPERES INDUCTIVE DC | | FEATURES PROVIDED | ACTUATOR SEAL | | INCLOSURE TYPE | FULLY INCLOSED | | MAXIMUM VOLTAGE RATING IN VOLTS | 28.0 DC | | MOUNTING METHOD | UNTHREADED HOLE | | NONPILE-UP CONTACT ARRANGEMENT | 1 POLE, SINGLE THROW, NORMALLY OPEN, MOMENTARY ACTION SINGLE SWITCH UNIT | | SWITCH RELEASE FORCE | 4.0 OUNCES MINIMUM | | SWITCH ACTUATING FORCE | 17.0 OUNCES MAXIMUM | | TERMINAL TYPE AND QUANTITY | 2 WIRE LEAD | | TEST DATA DOCUMENT | 19204-8434153 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | UNTHREADED MOUNTING HOLE DIAMETER | 0.088 INCHES NOMINAL |
|
|