| THREAD SERIES DESIGNATOR | UNEF SINGLE MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.375 INCHES SINGLE MOUNTING FACILITY |
| THREAD CLASS | 2A SINGLE MOUNTING FACILITY |
| THREAD LENGTH | 0.370 INCHES MINIMUM AND |
| 0.380 INCHES MAXIMUM SINGLE MOUNTING FACILITY |
| FEATURES PROVIDED | VARIABLE RESISTOR |
| SHAFT FLAT/SLOT ANGULAR LOCATION | 345.0 DEGREES FROM NONTURN DEVICE 1ST ACTUATOR |
| OPERATING TEMP RANGE | -65.0 TO 85.0 DEG CELSIUS |
| DETENT ROTATIONAL TORQUE RANGE | 8.000 TO 28.000 INCH-OUNCES 1ST ACTUATOR |
| SPECIAL FEATURES | SECOND SHAFT @ACTUATES VARIABLE RESISTOR |
| CONTACT VOLTAGE RATING IN VOLTS | 110.0 AC AT SEA LEVEL |
| 28.0 DC AT SEA LEVEL |
| CONTACT LOAD CURRENT RATING | 1.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| 2.0 AMPERES RESISTIVE LOAD DC AT SEA LEVEL |
| TERMINAL TYPE | TAB, SOLDER LUG |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 12 1ST ACTUATOR |
| STYLE DESIGNATOR | CIRCULAR WAFER, BUSHING MOUNT |
| OVERALL LENGTH | 3.972 INCHES NOMINAL |
| OVERALL HEIGHT | 0.985 INCHES MINIMUM AND |
| 1.015 INCHES MAXIMUM |
| OVERALL WIDTH | 0.922 INCHES MINIMUM AND |
| 0.952 INCHES MAXIMUM |
| INDIVIDUAL SECTION QUANTITY | 2 |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP NONSYMMETRICAL |
| POLE QUANTITY | 1 2ND SECTION REAR |
| SWITCH ACTUATOR POSITIONING INCREMENT | 30.0 DEGREES 1ST ACTUATOR |
| SHAFT TYPE | ROUND, HOLLOWED, FLATTED 1ST ACTUATOR |
| ROUND 2ND ACTUATOR |
| FIRST FLAT LENGTH | 0.188 INCHES NOMINAL 1ST ACTUATOR |
| FLAT HEIGHT | 0.218 INCHES NOMINAL 1ST ACTUATOR |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL 1ST ACTUATOR |
| 0.125 INCHES NOMINAL 2ND ACTUATOR |
| SHAFT LENGTH | 0.670 INCHES MINIMUM AND |
| 0.680 INCHES MAXIMUM 1ST ACTUATOR |
| 1.055 INCHES MINIMUM AND |
| 1.095 INCHES MAXIMUM 2ND ACTUATOR |
| MOUNTING METHOD | THREADED BUSHING SINGLE MOUNTING FACILITY |