| CONTACT VOLTAGE RATING IN VOLTS | 115.0 AC AT SEA LEVEL |
| 28.0 DC AT SEA LEVEL |
| CONTACT LOAD CURRENT RATING | 150.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| 200.0 MILLIAMPERES INDUCTIVE LOAD AND |
| 30.0 MILLIAMPERES INDUCTIVE LOAD AND |
| 100.0 MILLIAMPERES INDUCTIVE LOAD DC AT SEA LEVEL |
| TERMINAL TYPE | TAB, SOLDER LUG |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 2 SINGLE ACTUATOR |
| STYLE DESIGNATOR | SNAP OR LINE |
| OVERALL LENGTH | 1.242 INCHES NOMINAL |
| OVERALL DIAMETER | 0.562 INCHES NOMINAL |
| INDIVIDUAL SECTION QUANTITY | 1 |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| ROTOR THROUGH CONNECTION QUANTITY | 4 SINGLE SECTION |
| POLE QUANTITY | 4 SINGLE SECTION FRONT |
| THROW QUANTITY | 2 SINGLE SECTION REAR |
| CONTACT SWITCHING ACTION | MAKES BEFORE BREAKS SINGLE SECTION REAR |
| SWITCH ACTUATOR POSITIONING INCREMENT | 30.0 DEGREES SINGLE ACTUATOR |
| SWITCH ACTUATOR STOP DEVICE TYPE | FIXED STOP SINGLE ACTUATOR |
| SHAFT TYPE | ROUND SINGLE ACTUATOR |
| FIRST FLAT LENGTH | 0.235 INCHES MINIMUM AND |
| 0.265 INCHES MAXIMUM SINGLE ACTUATOR |
| FLAT HEIGHT | 0.088 INCHES MINIMUM AND |
| 0.098 INCHES MAXIMUM SINGLE ACTUATOR |
| SHAFT DIAMETER | 0.123 INCHES MINIMUM AND |
| 0.126 INCHES MAXIMUM SINGLE ACTUATOR |
| SHAFT LENGTH | 0.605 INCHES MINIMUM AND |
| 0.645 INCHES MAXIMUM SINGLE ACTUATOR |
| NONTURN DEVICE TYPE | FLATTED BUSHING AT 3:00 O'CLOCK |
| MOUNTING METHOD | THREADED BUSHING W/PANEL SEAL SINGLE MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNF SINGLE MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.250 INCHES SINGLE MOUNTING FACILITY |
| THREAD LENGTH | 0.230 INCHES MINIMUM AND |
| 0.255 INCHES MAXIMUM SINGLE MOUNTING FACILITY |
| TEST DATA DOCUMENT | 81349-MIL-S-3786 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 81349 |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-DTL-3786/35 |
| DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | M3786/35-059 |