| OVERALL LENGTH | 3.700 INCHES NOMINAL |
| BODY DIAMETER | 1.740 INCHES MAXIMUM |
| OVERALL DIAMETER | 1.740 INCHES MAXIMUM |
| PRESSURE SWITCH TYPE | GAGE |
| NONPILE-UP CONTACT ARRANGEMENT | 1 POLE, DOUBLE THROW, ONE POSITION MOMENTARY |
| CONTACT ACTION STIMULUS | INCREASE |
| CONTACT ADJUSTABILITY | DEACTUATION POINT NOT ADJUSTABLE AND |
| ACTUATION POINT NOT ADJUSTABLE |
| CONTACT STIMULUS RATING | 1250.00 ACTUATION POINT MAXIMUM POUNDS PER SQUARE INCH AND |
| 1000.00 DEACTUATION POINT MAXIMUM POUNDS PER SQUARE INCH AND |
| 250.00 DIFFERENTIAL POINT MAXIMUM POUNDS PER SQUARE INCH |
| CONTACT VOLTAGE RATING IN VOLTS | 28.0 DC AT SEA LEVEL SINGLE VOLTAGE |
| CONTACT LOAD CURRENT RATING | 5.0 AMPERES INDUCTIVE LOAD AND |
| 2.0 AMPERES LAMP LOAD SINGLE VOLTAGE |
| OPERATING TEMP RATING | -65.0 DEG FAHRENHEIT MINIMUM AND |
| 275.0 DEG FAHRENHEIT MAXIMUM |
| PROOF PRESSURE | 4500.00 POUNDS PER SQUARE INCH |
| PRESSURE CONNECTOR TYPE | PLAIN, THREADED EXTERNAL SINGLE CONNECTION |
| TERMINAL TYPE | CONNECTOR, RECEPTACLE |
| MOUNTING METHOD | CLAMP |
| THREAD SERIES DESIGNATOR | UNF SINGLE PRESSURE CONNECTION |
| NOMINAL THREAD SIZE | 0.438 INCHES SINGLE PRESSURE CONNECTION |
| THREAD CLASS | 3A SINGLE PRESSURE CONNECTION |
| THREAD QUANTITY PER INCH | 20 SINGLE PRESSURE CONNECTION |
| THREAD LENGTH | 0.378 INCHES NOMINAL SINGLE PRESSURE CONNECTION |
| FEATURES PROVIDED | ELECTRICAL ACCESS PORT |
| SPECIAL FEATURES | LOCKWIRE TAB |
| TEST DATA DOCUMENT | 81349-MIL-DTL-9395 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPECIFICATION/STANDARD DATA | 81349-MIL-DTL-9395/30 GOVERNMENT SPECIFICATION |
| SENSING ELEMENT BURST PRESSURE | 7500.00 POUNDS PER SQUARE INCH |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 81349 |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-DTL-9395/30 |
| DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | M9395/30-AMIKE |