| CONTACT VOLTAGE RATING IN VOLTS | 300.0 HIGHEST DC VOLTAGE RATING AT SEA LEVEL |
| 30.0 LOWEST DC VOLTAGE RATING AT SEA LEVEL |
| CONTACT LOAD CURRENT RATING | 50.0 MILLIAMPERES RESISTIVE LOAD HIGHEST DC VOLTAGE RATING AT SEA LEVEL |
| 500.0 MILLIAMPERES RESISTIVE LOAD AND |
| 50.0 MILLIAMPERES INDUCTIVE LOAD LOWEST DC VOLTAGE RATING AT SEA LEVEL |
| TERMINAL TYPE | TAB, SOLDER LUG |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 8 SINGLE ACTUATOR |
| STYLE DESIGNATOR | SQUARE WAFER, PANEL MOUNT |
| OVERALL LENGTH | 5.480 INCHES NOMINAL |
| INDIVIDUAL SECTION QUANTITY | 7 |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| ROTOR THROUGH CONNECTION QUANTITY | 2 EACH SECTION |
| POLE QUANTITY | 2 EACH SECTION FRONT |
| THROW QUANTITY | 8 EACH SECTION REAR |
| CONTACT SWITCHING ACTION | MAKES BEFORE BREAKS 1ST SECTION REAR |
| BREAKS BEFORE MAKES 2ND SECTION REAR |
| BREAKS BEFORE MAKES 3RD SECTION REAR |
| BREAKS BEFORE MAKES 4TH SECTION REAR |
| BREAKS BEFORE MAKES 5TH SECTION REAR |
| BREAKS BEFORE MAKES 6TH SECTION REAR |
| BREAKS BEFORE MAKES 7TH SECTION REAR |
| SWITCH ACTUATOR POSITIONING INCREMENT | 22.5 DEGREES SINGLE ACTUATOR |
| SWITCH ACTUATOR STOP DEVICE TYPE | FIXED STOP SINGLE ACTUATOR |
| SHAFT TYPE | ROUND, FLATTED SINGLE ACTUATOR |
| FIRST FLAT LENGTH | 0.250 INCHES NOMINAL SINGLE ACTUATOR |
| FLAT HEIGHT | 0.218 INCHES NOMINAL SINGLE ACTUATOR |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL SINGLE ACTUATOR |
| SHAFT LENGTH | 0.250 INCHES NOMINAL SINGLE ACTUATOR |
| MOUNTING METHOD | THREADED BUSHING 1ST MOUNTING FACILITY |
| THREADED HOLE 2ND MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNEF 1ST MOUNTING FACILITY |
| UNC 2ND MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.375 INCHES 1ST MOUNTING FACILITY |
| 0.138 INCHES 2ND MOUNTING FACILITY |
| THREAD CLASS | 2A 1ST MOUNTING FACILITY |
| 2B 2ND MOUNTING FACILITY |
| THREAD QUANTITY PER INCH | 32 2ND MOUNTING FACILITY |
| THREAD LENGTH | 0.375 INCHES NOMINAL 1ST MOUNTING FACILITY |
| MOUNTING FACILITY PATTERN | TWO POSITION IN-LINE 2ND MOUNTING FACILITY |
| LONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS | 1.375 INCHES NOMINAL 2ND MOUNTING FACILITY |
| SHAFT FLAT/SLOT ANGULAR LOCATION | 0.0 DEGREES FROM CONTACT POSITION 1 SINGLE ACTUATOR |
| OPERATING TEMP RANGE | -65.0 TO 125.0 DEG CELSIUS |
| DETENT ROTATIONAL TORQUE RANGE | 1.500 TO 13.000 INCH-POUNDS SINGLE ACTUATOR |
| PRECIOUS MATERIAL | GOLD |
| PRECIOUS MATERIAL AND LOCATION | CURRENT CARRYING PARTS SURFACES GOLD |