| BODY LENGTH | 2.370 INCHES MAXIMUM |
| CONTACT ACTION STIMULUS | INCREASE |
| CONTACT ADJUSTABILITY | DEACTUATION POINT NOT ADJUSTABLE AND ACTUATION POINT NOT ADJUSTABLE |
| CONTACT LOAD CURRENT RATING | 1.0 AMPERES RESISTIVE LOAD SINGLE VOLTAGE |
| CONTACT STIMULUS RATING | 17.50 ACTUATION POINT NOMINAL POUNDS PER SQUARE INCH AND 15.00 DEACTUATION POINT NOMINAL POUNDS PER SQUARE INCH AND 2.50 DIFFERENTIAL POINT NOMINAL POUNDS PER SQUARE INCH |
| CONTACT VOLTAGE RATING IN VOLTS | 28.0 DC AT SEA LEVEL SINGLE VOLTAGE |
| DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 1.120 INCHES NOMINAL |
| FEATURES PROVIDED | HERMETICALLY SEALED CASE |
| OUTSIDE DIAMETER | 1.135 INCHES MAXIMUM SINGLE CONNECTION |
| OVERALL HEIGHT | 1.090 INCHES MINIMUM AND 1.150 INCHES MAXIMUM |
| OVERALL LENGTH | 2.920 INCHES MAXIMUM |
| OVERALL WIDTH | 1.500 INCHES MAXIMUM |
| MEDIA FOR WHICH DESIGNED | GAS OR LIQUID |
| MOUNTING FACILITY PATTERN | TWO POSITION IN-LINE |
| MOUNTING METHOD | BASE AND UNTHREADED HOLE |
| NOMINAL THREAD SIZE | 0.500 INCHES SINGLE PRESSURE CONNECTION |
| NONPILE-UP CONTACT ARRANGEMENT | 1 POLE, DOUBLE THROW, ONE POSITION MOMENTARY |
| OPERATING TEMP RATING | -65.0 FAHRENHEIT MINIMUM AND 275.0 FAHRENHEIT MAXIMUM |
| PRESSURE SWITCH TYPE | GAGE |
| PRESSURE CONNECTOR TYPE | FLARED, THREADED EXTERNAL SINGLE CONNECTION |
| PROOF PRESSURE | 270.00 POUNDS PER SQUARE INCH |
| SENSING ELEMENT BURST PRESSURE | 800.00 POUNDS PER SQUARE INCH |
| SPECIFICATION/STANDARD DATA | 81349-MIL-S-9395/39 GOVERNMENT SPECIFICATION |
| STYLE DESIGNATOR | RECTANGULAR |
| TERMINAL TYPE | CONNECTOR, RECEPTACLE |
| TEST DATA DOCUMENT | 81349-MIL-S-9395 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD CLASS | 3A SINGLE PRESSURE CONNECTION |
| THREAD SERIES DESIGNATOR | UNF SINGLE PRESSURE CONNECTION |
| THREAD QUANTITY PER INCH | 20 SINGLE PRESSURE CONNECTION |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.200 INCHES MINIMUM AND 0.224 INCHES MAXIMUM |