5930-01-141-5368, BOOT,DUST AND MOISTURE SEAL

5935-01-141-5369 COVER,ELECTRICAL CONNECTOR

National Stock Number:
5930-01-141-5368

Federal Supply Class:
5930

National Item Identification Number:
011415368

Description:
BOOT,DUST AND MOISTURE SEAL

Detail:
A flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Manufacturer Information:

0561C0029	03538	LOCKHEED MARTIN CORPORATION
1426A-1-1-11.2	81312	WINCHESTER INTERCONNECT CORPORATION
437-6726903-7	53711	NAVAL SEA SYSTEMS COMMAND
32-341	81640	SAFRAN POWER USA, LLC
32-341-20PSI	81640	SAFRAN POWER USA, LLC
457-5864	A486G	NIMIKKEISTOKESKUS NCB FINLAND
531-6985692 PN 009	53711	NAVAL SEA SYSTEMS COMMAND
703-7069236-4	53711	NAVAL SEA SYSTEMS COMMAND
5180-9615 ITEM 33	88898	THE JOHNS HOPKINS UNIVERSITY APPLIED PHYSICS LABORATORY LLC
5180-9715 ITEM 33	88898	THE JOHNS HOPKINS UNIVERSITY APPLIED PHYSICS LABORATORY LLC
5180-9815 ITEM 33	88898	THE JOHNS HOPKINS UNIVERSITY APPLIED PHYSICS LABORATORY LLC
5330005746704	A00AM	E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE
5930011415368	A00AM	E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE
5330005746704	SCY13	E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
M5423/16-01	53711	NAVAL SEA SYSTEMS COMMAND
M5423/16-01	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
M5423/16	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
M5423/16-001	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
M5423/16A	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-B-5423/16	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-DTL-5423/16	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
M5423/16-1	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
TS10368	91929	HONEYWELL INTERNATIONAL INC.
H655-1310- PN 009	96169	ELECTRIC BOAT CORPORATION
M5423/16-1	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS25196/32-341	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
M5423/16-01	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

BODY OUTSIDE DIAMETER	0.650 INCHES MINIMUM AND 0.677 INCHES MAXIMUM
OVERALL HEIGHT	0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM
MATERIAL	RUBBER SILICONE BODY
MOUNTING DEVICE QUANTITY	1
MOUNTING METHOD	THREADED HOLE
OPENING INSIDE DIAMETER	0.461 INCHES MINIMUM AND 0.472 INCHES MAXIMUM
SPECIFICATION/STANDARD DATA	81349-MIL-B-5423/16 GOVERNMENT SPECIFICATION
STYLE DESIGNATOR	THRU-HOLE
TEST DATA DOCUMENT	81349-MIL-B-5423 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).

Click here to Register for Free 30-day Trial