| STYLE DESIGNATOR | DISC W/FLANGE |
| OVERALL LENGTH | 1.190 INCHES MINIMUM AND |
| 1.260 INCHES MAXIMUM |
| OVERALL HEIGHT | 0.453 INCHES MINIMUM AND |
| 0.683 INCHES MAXIMUM |
| BODY DIAMETER | 0.560 INCHES MINIMUM AND |
| 0.640 INCHES MAXIMUM |
| BODY HEIGHT | 0.280 INCHES MINIMUM AND |
| 0.395 INCHES MAXIMUM |
| NONPILE-UP CONTACT ARRANGEMENT | 1 POLE, SINGLE THROW, NORMALLY CLOSED, MOMENTARY ACTION |
| CONTACT ACTION STIMULUS | INCREASE |
| CONTACT ADJUSTABILITY | DEACTUATION POINT NOT ADJUSTABLE AND |
| ACTUATION POINT NOT ADJUSTABLE |
| CONTACT STIMULUS RATING | 145.00 ACTUATION POINT MINIMUM DEGREES FAHRENHEIT AND |
| 155.00 ACTUATION POINT MAXIMUM DEGREES FAHRENHEIT AND |
| 130.00 DIFFERENTIAL POINT MINIMUM DEGREES FAHRENHEIT AND |
| 140.00 DIFFERENTIAL POINT MAXIMUM DEGREES FAHRENHEIT |
| CONTACT VOLTAGE RATING IN VOLTS | 115.0 AC AT SEA LEVEL FIRST VOLTAGE |
| 28.0 DC AT SEA LEVEL SECOND VOLTAGE |
| 28.0 DC AT ALTITUDE THIRD VOLTAGE |
| FREQUENCY IN HERTZ | 60.0 SINGLE VOLTAGE |
| CONTACT LOAD CURRENT RATING | 2.0 AMPERES RESISTIVE LOAD AND |
| 1.0 AMPERES INDUCTIVE LOAD AND |
| 500.0 MILLIAMPERES LAMP LOAD FIRST VOLTAGE |
| 2.5 AMPERES INDUCTIVE LOAD AND |
| 1.0 AMPERES LAMP LOAD SECOND VOLTAGE |
| 5.0 AMPERES RESISTIVE LOAD AND |
| 1.0 AMPERES LAMP LOAD THIRD VOLTAGE |
| OPERATING TEMP RATING | -65.0 DEG FAHRENHEIT MINIMUM AND |
| 500.0 DEG FAHRENHEIT MAXIMUM |
| MEDIA FOR WHICH DESIGNED | GAS |
| TEMP SENSING ELEMENT TYPE | INTERNAL SENSOR |
| TERMINAL TYPE | TAB, SOLDER LUG |
| MOUNTING METHOD | SLOT AND |
| UNTHREADED HOLE |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.140 INCHES NOMINAL |
| MOUNTING SLOT WIDTH | 0.140 INCHES NOMINAL |
| MOUNTING FACILITY PATTERN | TWO POSITION IN-LINE |
| DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 0.937 INCHES NOMINAL |
| FEATURES PROVIDED | HERMETICALLY SEALED CASE |
| TEST DATA DOCUMENT | 81349-MIL-S-24236 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPEC/STD CONTROLLING DATA | |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-PRF-24236/1 |
| MANUFACTURERS CODE | 81349 |
| DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | M24236/1-1245 |