| CONTACT VOLTAGE RATING IN VOLTS | 125.0 AC AT SEA LEVEL |
| CONTACT LOAD CURRENT RATING | 7.5 AMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| TERMINAL TYPE | SCREW |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 12 SINGLE ACTUATOR |
| STYLE DESIGNATOR | TAP, CIRCUIT SELECTOR |
| OVERALL LENGTH | 8.092 INCHES NOMINAL |
| OVERALL HEIGHT | 2.810 INCHES NOMINAL |
| OVERALL WIDTH | 2.810 INCHES NOMINAL |
| INDIVIDUAL SECTION QUANTITY | 7 |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| POLE QUANTITY | 1 EACH SECTION PERIPHERY |
| THROW QUANTITY | 11 EACH SECTION PERIPHERY |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES EACH SECTION PERIPHERY |
| SWITCH ACTUATOR POSITIONING INCREMENT | 30.0 DEGREES SINGLE ACTUATOR |
| MOUNTING METHOD | THREADED HOLE 1ST MOUNTING FACILITY |
| THREADED STUD 2ND MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNC 1ST MOUNTING FACILITY |
| UNF 2ND MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.190 INCHES 1ST MOUNTING FACILITY |
| 0.190 INCHES 2ND MOUNTING FACILITY |
| THREAD CLASS | 2B 1ST MOUNTING FACILITY |
| 2A 2ND MOUNTING FACILITY |
| THREAD QUANTITY PER INCH | 24 1ST MOUNTING FACILITY |
| MOUNTING FACILITY PATTERN | FOUR POSITION CIRCULAR 1ST MOUNTING FACILITY |
| FOUR POSITION CIRCULAR 2ND MOUNTING FACILITY |
| MOUNTING FACILITY CIRCLE RADIUS | 1.625 INCHES NOMINAL 1ST MOUNTING FACILITY |
| 0.905 INCHES NOMINAL 2ND MOUNTING FACILITY |
| FEATURES PROVIDED | ACTUATOR KNOB |
| TEST DATA DOCUMENT | 81349-MIL-S-21604 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| PRECIOUS MATERIAL | SILVER |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES SILVER |
| SPECIFICATION/STANDARD DATA | 81349-MIL-S-21604/4 GOVERNMENT SPECIFICATION |
| SPEC/STD CONTROLLING DATA | |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-DTL-21604/4 |
| MANUFACTURERS CODE | 81349 |
| DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | S3JM7 |