| CONTACT LOAD CURRENT RATING | 0.5 AMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| CONTACT LOAD CURRENT RATING | 0.5 AMPERES RESISTIVE LOAD DC AT SEA LEVEL |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES EACH SECTION REAR |
| CONTACT VOLTAGE RATING IN VOLTS | 115.0 AC AT SEA LEVEL |
| CONTACT VOLTAGE RATING IN VOLTS | 30.0 DC AT SEA LEVEL |
| DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 1.375 INCHES NOMINAL SECOND MOUNTING FACILITY |
| FIRST FLAT LENGTH | 0.250 INCHES NOMINAL SINGLE ACTUATOR |
| FLAT HEIGHT | 0.216 INCHES NOMINAL SINGLE ACTUATOR |
| HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | EXPLOSION PROOF |
| INDIVIDUAL SECTION QUANTITY | 8 |
| POLE QUANTITY | 1 EACH SECTION REAR |
| PRECIOUS MATERIAL AND LOCATION | CONTACT AND TERMINAL SURFACES GOLD AND CONTACTS SILVER |
| PRECIOUS MATERIAL | GOLD AND SILVER |
| MOUNTING FACILITY PATTERN | TWO POSITION IN-LINE SECOND MOUNTING FACILITY |
| MOUNTING METHOD | THREADED BUSHING FIRST MOUNTING FACILITY |
| MOUNTING METHOD | THREADED HOLE(S) SECOND MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.138 INCHES SECOND MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.375 INCHES FIRST MOUNTING FACILITY |
| NONTURN DEVICE RADIUS | 0.531 INCHES NOMINAL AT 12:00 OCLOCK |
| NONTURN DEVICE TYPE | TAB AT 12:00 OCLOCK |
| OPERATING TEMP RANGE | -65.0 TO 125.0 CELSIUS |
| OVERALL HEIGHT | 1.750 INCHES NOMINAL |
| OVERALL LENGTH | 6.408 INCHES NOMINAL |
| OVERALL WIDTH | 1.750 INCHES NOMINAL |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL FIRST ACTUATOR |
| SHAFT LENGTH | 0.625 INCHES NOMINAL SINGLE ACTUATOR |
| SHAFT TYPE | ROUND, FLATTED SINGLE ACTUATOR |
| STYLE DESIGNATOR | TAP, SQUARE FRAME |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 10 SINGLE ACTUATOR |
| SWITCH ACTUATOR POSITIONING INCREMENT | 30.0 DEGREES SINGLE ACTUATOR |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| TERMINAL TYPE | TAB, SOLDER LUG |
| THREAD LENGTH | 0.375 INCHES NOMINAL FIRST MOUNTING FACILITY |
| THREAD CLASS | 2A FIRST MOUNTING FACILITY |
| THREAD CLASS | 2B SECOND MOUNTING FACILITY |
| THREAD QUANTITY PER INCH | 32 SECOND MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNEF FIRST MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) SECOND MOUNTING FACILITY |
| THROW QUANTITY | 10 EACH SECTION REAR |