| ACTUATOR HEIGHT | 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM |
| ACTUATOR POSITION-ACTION RELATIONSHIP | UP POSITION MAINTAINED AND DOWN POSITION MAINTAINED |
| ACTUATOR STYLE | RECTANGULAR |
| ACTUATOR WIDTH | 0.070 INCHES NOMINAL |
| BODY HEIGHT | 0.240 INCHES MINIMUM AND 0.300 INCHES MAXIMUM |
| BODY LENGTH | 1.000 INCHES MAXIMUM |
| BODY STYLE | PRINTED CIRCUIT |
| BODY WIDTH | 0.380 INCHES NOMINAL |
| CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | 100.0 MILLIAMPERES RESISTIVE DC AND 25.0 MILLIAMPERES RESISTIVE DC |
| HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | DUSTPROOF |
| INCLOSURE TYPE | HERMETICALLY SEALED |
| OVERALL HEIGHT | 0.480 INCHES NOMINAL |
| OVERALL LENGTH | 1.000 INCHES MAXIMUM |
| OVERALL WIDTH | 0.380 INCHES NOMINAL |
| MATERIAL | PLASTIC CASE |
| MAXIMUM VOLTAGE RATING IN VOLTS | 6.0 DC AND 24.0 DC |
| MOUNTING METHOD | PRINTED CIRCUIT |
| NONPILE-UP CONTACT ARRANGEMENT | 1 POLE, SINGLE THROW, BOTH POSITIONS MAINTAINED 1ST SWITCH UNIT |
| NONPILE-UP CONTACT ARRANGEMENT | 1 POLE, SINGLE THROW, BOTH POSITIONS MAINTAINED 2ND SWITCH UNIT |
| NONPILE-UP CONTACT ARRANGEMENT | 1 POLE, SINGLE THROW, BOTH POSITIONS MAINTAINED 3RD SWITCH UNIT |
| NONPILE-UP CONTACT ARRANGEMENT | 1 POLE, SINGLE THROW, BOTH POSITIONS MAINTAINED 4TH SWITCH UNIT |
| NONPILE-UP CONTACT ARRANGEMENT | 1 POLE, SINGLE THROW, BOTH POSITIONS MAINTAINED 5TH SWITCH UNIT |
| NONPILE-UP CONTACT ARRANGEMENT | 1 POLE, SINGLE THROW, BOTH POSITIONS MAINTAINED 6TH SWITCH UNIT |
| NONPILE-UP CONTACT ARRANGEMENT | 1 POLE, SINGLE THROW, BOTH POSITIONS MAINTAINED 7TH SWITCH UNIT |
| NONPILE-UP CONTACT ARRANGEMENT | 1 POLE, SINGLE THROW, BOTH POSITIONS MAINTAINED 8TH SWITCH UNIT |
| NONPILE-UP CONTACT ARRANGEMENT | 1 POLE, SINGLE THROW, BOTH POSITIONS MAINTAINED 9TH SWITCH UNIT |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SIURFACES GOLD |
| SPECIFICATION/STANDARD DATA | 81349-MIL-S-83504/1 GOVERNMENT SPECIFICATION |
| SWITCH ACTUATOR QUANTITY | 9 |
| TERMINAL TYPE AND QUANTITY | 18 PRINTED CIRCUIT |
| TEST DATA DOCUMENT | 81349-MIL-S-83504 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |