| CONTACT LOAD CURRENT RATING | 300.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES 2ND SECTION REAR |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES 4TH SECTION REAR |
| CONTACT SWITCHING ACTION | MAKES BEFORE BREAKS 1ST SECTION REAR |
| CONTACT SWITCHING ACTION | MAKES BEFORE BREAKS 3RD SECTION REAR |
| CONTACT VOLTAGE RATING IN VOLTS | 115.0 AC AT SEA LEVEL |
| FIRST FLAT LENGTH | 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM SINGLE ACTUATOR |
| FLAT HEIGHT | 0.084 INCHES MINIMUM AND 0.104 INCHES MAXIMUM SINGLE ACTUATOR |
| HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | EXPLOSION PROOF AND SALT SPRAY RESISTANT |
| INDIVIDUAL SECTION QUANTITY | 4 |
| OVERALL DIAMETER | 0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM |
| OVERALL LENGTH | 1.461 INCHES MINIMUM AND 2.016 INCHES MAXIMUM |
| MOUNTING METHOD | THREADED BUSHING SINGLE MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.250 INCHES SINGLE MOUNTING FACILITY |
| NONTURN DEVICE TYPE | FLATTED BUSHING AT 3:00 O'CLOCK |
| NONTURN DEVICE TYPE | FLATTED BUSHING AT 9:00 O'CLOCK |
| OPERATING TEMP RANGE | -65.0 TO 125.0 CELSIUS |
| POLE QUANTITY | 1 EACH SECTION FRONT |
| PRECIOUS MATERIAL AND LOCATION | CONTACT AND TERMINAL SURFACES GOLD AND CONTACT AND TERMINAL SURFACES SILVER |
| PRECIOUS MATERIAL | GOLD AND SILVER |
| ROTOR THROUGH CONNECTION QUANTITY | 1 EACH SECTION |
| SHAFT DIAMETER | 0.123 INCHES MINIMUM AND 0.126 INCHES MAXIMUM SINGLE ACTUATOR |
| SHAFT LENGTH | 0.355 INCHES MINIMUM AND 0.395 INCHES MAXIMUM SINGLE ACTUATOR |
| SHAFT TYPE | ROUND, FLATTED SINGLE ACTUATOR |
| STYLE DESIGNATOR | TAP, CIRCULAR, BUSHING MOUNT |
| SWITCH ACTUATOR POSITIONING INCREMENT | 30.0 DEGREES SINGLE ACTUATOR |
| SWITCH ACTUATOR STOP DEVICE TYPE | ADJUSTABLE STOP SINGLE ACTUATOR |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 10 SINGLE ACTUATOR |
| TERMINAL TYPE | TAB, SOLDER LUG |
| THREAD CLASS | 2A SINGLE MOUNTING FACILITY |
| THREAD LENGTH | 0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM SINGLE MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNEF SINGLE MOUNTING FACILITY |
| THROW QUANTITY | 10 EACH SECTION REAR |