| CONTACT VOLTAGE RATING IN VOLTS | 125.0 AC AT SEA LEVEL |
| 350.0 HIGHEST DC VOLTAGE RATING AT SEA LEVEL |
| 120.0 LOWEST DC VOLTAGE RATING AT SEA LEVEL |
| CONTACT LOAD CURRENT RATING | 10.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| 2.0 AMPERES INDUCTIVE LOAD AND |
| 2.0 AMPERES RESISTIVE LOAD HIGHEST DC VOLTAGE RATING AT SEA LEVEL |
| 10.0 AMPERES INDUCTIVE LOAD AND |
| 10.0 AMPERES RESISTIVE LOAD LOWEST DC VOLTAGE RATING AT SEA LEVEL |
| TERMINAL TYPE | TAB W/SCREW |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 4 SINGLE ACTUATOR |
| STYLE DESIGNATOR | TAP, CIRCUIT SELECTOR |
| OVERALL LENGTH | 8.938 INCHES NOMINAL |
| OVERALL HEIGHT | 2.500 INCHES MAXIMUM |
| OVERALL WIDTH | 3.000 INCHES MAXIMUM |
| INDIVIDUAL SECTION QUANTITY | 22 |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP NONSYMMETRICAL |
| SWITCH ACTUATOR POSITIONING INCREMENT | 90.0 DEGREES SINGLE ACTUATOR |
| MOUNTING METHOD | BRACKET AND |
| THREADED HOLE 1ST MOUNTING FACILITY |
| BRACKET AND |
| UNTHREADED HOLE 2ND MOUNTING FACILITY |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.203 INCHES NOMINAL 2ND MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNC 1ST MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.190 INCHES 1ST MOUNTING FACILITY |
| THREAD CLASS | 2B 1ST MOUNTING FACILITY |
| THREAD QUANTITY PER INCH | 24 1ST MOUNTING FACILITY |
| MOUNTING FACILITY PATTERN | FOUR POSITION CIRCULAR 1ST MOUNTING FACILITY |
| TWO POSITION IN-LINE 2ND MOUNTING FACILITY |
| DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 2.094 INCHES NOMINAL 2ND MOUNTING FACILITY |
| MOUNTING FACILITY CIRCLE RADIUS | 1.156 INCHES NOMINAL 1ST MOUNTING FACILITY |
| FEATURES PROVIDED | ACTUATOR KNOB AND |
| DUMMY SECTION |
| HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | SHOCK RESISTANT AND |
| VIBRATION RESISTANT |
| SPECIAL FEATURES | ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE ELECTRONICS SUPPLY CENTER PRODUCTION STANDARD NO. L04372; FOR NAVY NUCLEAR PROPULSION PLANT PRODUCTS ONLY; JUMPER SUPPLIED |
| CRITICALITY CODE JUSTIFICATION | FEAT |