| DETENT ROTATIONAL TORQUE RANGE | +14.000/+17.000 INCH-OUNCES SINGLE ACTUATOR |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES SINGLE SECTION REAR |
| FIRST FLAT LENGTH | 6.5 MILLIMETERS NOMINAL SINGLE ACTUATOR |
| INDIVIDUAL SECTION QUANTITY | 1 |
| POLE QUANTITY | 1 SINGLE SECTION REAR |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING METHOD | THREADED BUSHING W/PANEL SEAL SINGLE MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.375 INCHES SINGLE MOUNTING FACILITY |
| NONTURN DEVICE RADIUS | 9.4 MILLIMETERS MINIMUM AT 2:00 O'CLOCK AND 9.6 MILLIMETERS MAXIMUM AT 2:00 O'CLOCK |
| NONTURN DEVICE TYPE | KEY AT 2:00 O'CLOCK |
| OVERALL DIAMETER | 25.0 MILLIMETERS NOMINAL |
| OVERALL LENGTH | 32.3 MILLIMETERS NOMINAL |
| SHAFT DIAMETER | 6.3 MILLIMETERS MINIMUM SINGLE ACTUATOR AND 6.35 MILLIMETERS MAXIMUM SINGLE ACTUATOR |
| SHAFT LENGTH | 6.6 MILLIMETERS NOMINAL SINGLE ACTUATOR |
| SHAFT FLAT/SLOT ANGULAR LOCATION | 45.0 DEGREES FROM NONTURN DEVICE SINGLE ACTUATOR |
| SHAFT TYPE | ROUND, PARALLEL FLATTED SINGLE ACTUATOR |
| WIDTH BETWEEN FLATS | 4.25 MILLIMETERS MINIMUM SINGLE ACTUATOR AND 4.35 MILLIMETERS MAXIMUM SINGLE ACTUATOR |
| STYLE DESIGNATOR | CIRCULAR WAFER, BUSHING MOUNT |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 11 SINGLE ACTUATOR |
| SWITCH ACTUATOR POSITIONING INCREMENT | 30.0 DEGREES SINGLE ACTUATOR |
| SWITCH ACTUATOR STOP DEVICE TYPE | FIXED STOP SINGLE ACTUATOR |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| TERMINAL TYPE | TAB, SOLDER LUG |
| THREAD CLASS | 2A SINGLE MOUNTING FACILITY |
| THREAD LENGTH | 10.70 MILLIMETERS NOMINAL SINGLE MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNEF SINGLE MOUNTING FACILITY |
| THROW QUANTITY | 11 SINGLE SECTION REAR |