|
|
|
National Stock Number:
5935-00-028-0950
Federal Supply Class:
5935
National Item Identification Number:
000280950
Description:
CONNECTOR,RECEPTACLE,ELECTRICAL
Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| 4144500-4 | 05869 | RAYTHEON COMPANY | | M28748/10G0X01A | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MRS0158S000CX000 | 27832 | HUGHES AIRCRAFT CO NEWPORT BEACH DIV | | M28748/10G0XO1A | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-DTL-28748/10 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MILC28748-10 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS18166-2X | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| TEST DATA DOCUMENT | 81349-MIL-C-28748 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | PRECIOUS MATERIAL | GOLD | | PRECIOUS MATERIAL AND WEIGHT | 0.158 GOLD GRAINS, TROY | | PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD | | SPECIAL FEATURES | POLARIZED X POSITION | | SPECIFICATION/STANDARD DATA | 81349-MIL-C-28748/10 GOVERNMENT SPECIFICATION | | SPEC/STD CONTROLLING DATA | | | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-DTL-28748/10 | | MANUFACTURERS CODE | 81349 | | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | M28748/10G0XO1A | | MATING END QUANTITY | 1 | | OVERALL LENGTH | 2.865 INCHES MINIMUM AND | | 2.885 INCHES MAXIMUM | | OVERALL HEIGHT | 1.733 INCHES NOMINAL | | OVERALL WIDTH | 1.850 INCHES MINIMUM AND | | 1.870 INCHES MAXIMUM | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.245 INCHES MINIMUM AND | | 1.255 INCHES MAXIMUM | | DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 2.495 INCHES MINIMUM AND | | 2.505 INCHES MAXIMUM | | UNTHREADED MOUNTING HOLE DIAMETER | 0.149 INCHES NOMINAL | | CONNECTOR LOCKING METHOD | SCREW | | THREADED DEVICE TYPE | COUPLING FACILITY | | THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD SIZE | 0.250 INCHES | | THREAD CLASS | 2B | | THREAD QUANTITY PER INCH | 28 | | THREAD DIRECTION | RIGHT-HAND | | POLARIZATION METHOD | POLARIZATION BOSS | | INSERT MATERIAL | PLASTIC DIALLYL PHTHALATE SINGLE MATING END | | INSERT MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-14,TYPE SDG-F MIL SPEC SINGLE MATERIAL RESPONSE OR | | MIL-P-19833,TYPE GDI-30 MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END | | ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT AND | | VIBRATION RESISTANT |
|
|