|
|
|
National Stock Number:
5935-00-134-5312
Federal Supply Class:
5935
National Item Identification Number:
001345312
Description:
BACKSHELL,ELECTRICAL CONNECTOR
Detail:
An item specifically designed to be placed around that portion of a CONNECTOR, RECEPTABLE, ELECTRICAL or CONNECTOR, PLUG, ELECTRICAL which contains the facilities for attaching wires or cables. It may be designed to provide the necessary accomodations between an electrical cable clamping device and an electrical connector shell, or it may include the clamping device. It may be used for shielding against electrical interference, mechanical injury, or physical damage due to environmental conditions.
|
Manufacturer Information:
| 1JC8115H06 | 97942 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | M1-14HSL | 81312 | WINCHESTER INTERCONNECT CORPORATION | | MRE14H9JTC | 81312 | WINCHESTER INTERCONNECT CORPORATION | | MIL-C-28748 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-DTL-28748 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS24132-3S | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| CABLE OPENING DIAMETER | 0.190 INCHES MINIMUM | | CABLE OPENING QUANTITY | 1 | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 0.932 INCHES MINIMUM AND 0.942 INCHES MAXIMUM | | OVERALL HEIGHT | 1.615 INCHES NOMINAL | | OVERALL LENGTH | 1.870 INCHES NOMINAL | | OVERALL WIDTH | 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM | | MATERIAL | ALUMINUM ALLOY | | MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED HOLE | | SIZE DESIGNATION | 14 | | SPECIFICATION/STANDARD DATA | 96906-MS24132 GOVERNMENT STANDARD | | STYLE DESIGNATOR | HOOD, SIDE OPENING W/JACKSCREW AND CLAMP | | SPECIAL FEATURES | SUPPLIED WITHOUT JACKSCREW AND SOCKET | | SURFACE TREATMENT | ANODIZE | | TEST DATA DOCUMENT | 81349-MIL-C-28748 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | UNTHREADED MOUNTING HOLE DIAMETER | 0.119 INCHES MINIMUM AND 0.123 INCHES MAXIMUM |
|
|