|
|
|
National Stock Number:
5935-00-231-9680
Federal Supply Class:
5935
National Item Identification Number:
002319680
Description:
CONNECTOR,PLUG,ELECTRICAL
Detail:
An electrical fitting with electrical contacts, constructed to be affixed to the end of a cable, conduit, coaxial line, cord or wiring for convenience in joining with other electrical connector(s) or PRINTED WIRING BOARD and is not designed to be mounted on a bulkhead, chasses, panel, PRINTED WIRING BOARD, or the like. Excludes JACK, TELEPHONE; JACK, TIP; PLUG, TELEPHONE; PLUG TIP; INSERT, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified); and SOCKET, PLUG-IN, ELECTRONIC COMPONENTS. See also LEAD ASSEMBLY, ELECTRICAL; WIRING HARNESS (as modified); and CABLE ASSEMBLY (as modified). For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| 20500 | 74868 | AMPHENOL CORPORATION | | C0N59 | 21900 | FEDERAL DIV OF VICTOREEN INSTRUMENT CO INC | | UG495U | 80058 | JOINT ELECTRONICS TYPE DESIGNATION SYSTEM | | RE49F536 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | RE49F536TYPEUG495U | 80064 | NAVAL SHIP SYSTEMS COMMAND | | RE49F536UG495U | 80064 | NAVAL SHIP SYSTEMS COMMAND | | UG495U | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR | | UG495U | 80064 | NAVAL SHIP SYSTEMS COMMAND |
|
Techincal Specification:
| BODY STYLE | STRAIGHT SHAPE, INTERNAL COUPLING | | CONNECTOR CABLE STRAIN RELIEF METHOD | INTEGRAL CLAMP | | CONNECTOR LOCKING METHOD | INTERNALLY THREADED COUPLING NUT | | CONTACT MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-613,COMP FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT REMOVABILITY | REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT POSITION ARRANGEMENT STYLE | HN SINGLE MATING END | | CONTACT SURFACE TREATMENT | SILVER SINGLE MATING END SINGLE CONTACT GROUPING | | ENVIRONMENTAL PROTECTION | WATERTIGHT | | INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING | | INCLUDED CONTACT QUANTITY | 1 SINGLE MATING END SINGLE CONTACT GROUPING | | MATING END QUANTITY | 1 | | NOMINAL THREAD LENGTH | 0.375 INCHES | | NOMINAL THREAD SIZE | 0.750 INCHES | | OVERALL DIAMETER | 1.313 INCHES NOMINAL | | OVERALL LENGTH | 2.500 INCHES NOMINAL | | POLARIZATION METHOD | MATING END | | PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACE SILVER | | PRECIOUS MATERIAL | SILVER | | RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS | 50.0 SINGLE MATING END SINGLE CONTACT GROUPING | | SHELL MATERIAL | COPPER ALLOY | | SHELL SURFACE TREATMENT | SILVER | | SHELL TYPE | SOLID | | TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING | | TERMINAL TYPE | SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING | | TEST DATA DOCUMENT | 80058-MIL-C-3643A SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | THREADED DEVICE TYPE | COUPLING FACILITY | | THREAD SERIES DESIGNATOR | UNEF |
|
|