|
|
|
National Stock Number:
5935-00-233-6735
Federal Supply Class:
5935
National Item Identification Number:
002336735
Description:
CONNECTOR,RECEPTACLE,ELECTRICAL
Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| 052-070-0019-224 | 98291 | ITT CANNON RF PRODUCTS | | 52-070-0019 | 98291 | ITT CANNON RF PRODUCTS | | G350289S1 | 24930 | L3HARRIS TECHNOLOGIES, INC |
|
Techincal Specification:
| BODY STYLE | ANGLE SHAPE | | CONTACT POSITION ARRANGEMENT STYLE | NONSTD SINGLE MATING END | | TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING | | TERMINAL TYPE | CRIMP SINGLE MATING END SINGLE CONTACT GROUPING | | INCLUDED CONTACT TYPE | COAXIAL SOCKET SINGLE MATING END SINGLE CONTACT GROUPING | | INCLUDED CONTACT QUANTITY | 1 SINGLE MATING END SINGLE CONTACT GROUPING | | MATING END QUANTITY | 1 | | OVERALL LENGTH | 1.120 INCHES NOMINAL | | OVERALL HEIGHT | 0.870 INCHES NOMINAL | | OVERALL WIDTH | 0.365 INCHES MINIMUM AND | | 0.395 INCHES MAXIMUM | | BUSHING ACCOMMODATION HOLE SHAPE | ROUND | | CONNECTOR LOCKING METHOD | BAYONET PIN | | THREADED DEVICE TYPE | MOUNTING BUSHING | | THREAD SERIES DESIGNATOR | UNS | | NOMINAL THREAD SIZE | 0.281 INCHES | | THREAD CLASS | 2A | | THREAD QUANTITY PER INCH | 40 | | THREAD DIRECTION | RIGHT-HAND | | CONNECTOR CABLE STRAIN RELIEF METHOD | CRIMP TYPE | | CABLE ENTRANCE DIAMETER | 0.110 INCHES NOMINAL | | SHELL TYPE | SOLID | | SHELL MATERIAL | COPPER ALLOY | | SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-626,COMP 22,1/2 H FED SPEC SINGLE MATERIAL RESPONSE | | SHELL SURFACE TREATMENT | GOLD | | INSERT MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE SINGLE MATING END | | INSERT MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-14077,CLASS 1 MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END | | CONTACT REMOVABILITY | REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 500.0 SINGLE MATING END SINGLE CONTACT GROUPING | | RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS | 50.0 SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END SINGLE CONTACT GROUPING | | ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT AND | | SALT WATER RESISTANT AND | | VIBRATION PROOF | | PRECIOUS MATERIAL | GOLD | | PRECIOUS MATERIAL AND WEIGHT | 0.105 GOLD GRAINS, TROY | | PRECIOUS MATERIAL AND LOCATION | CONTACT AND SHELL SURFACES GOLD |
|
|