5935-00-235-3220, CONNECTOR,RECEPTACLE,ELECTRICAL

5935-00-235-3219 CONNECTOR,RECEPTACLE,ELECTRICAL

National Stock Number:
5935-00-235-3220

Federal Supply Class:
5935

National Item Identification Number:
002353220

Description:
CONNECTOR,RECEPTACLE,ELECTRICAL

Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.

Manufacturer Information:

3179818	59364	HONEYWELL INTERNATIONAL INC.
3179818	77068	ALLIED-SIGNAL INC DBA ALLIED-SIGNAL AEROSPACE CO ELECTRODYNAMICS DIV
WD22SD8X980	81312	WINCHESTER INTERCONNECT CORPORATION

Techincal Specification:

CONTACT MATERIAL DOCUMENT AND CLASSIFICATION	QQ-B-750,COMP A,HARD FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END ALL CONTACT GROUPINGS
CONTACT REMOVABILITY	NONREMOVABLE SINGLE MATING END ALL CONTACT GROUPINGS
CONTACT MATERIAL	COPPER ALLOY SINGLE MATING END ALL CONTACT GROUPINGS
CONTACT MAXIMUM CURRENT RATING IN AMPS	5.0 SINGLE MATING END ALL CONTACT GROUPINGS
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-G-45204,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END ALL CONTACT GROUPINGS
CONTACT SURFACE TREATMENT	GOLD SINGLE MATING END ALL CONTACT GROUPINGS
DISTANCE BETWEEN MOUNTING FACILITY CENTERS	2.533 INCHES MINIMUM AND 2.547 INCHES MAXIMUM
ENVIRONMENTAL PROTECTION	HEAT RESISTANT AND SALT WATER RESISTANT
INCLUDED CONTACT QUANTITY	6 SINGLE MATING END 1ST CONTACT GROUPING
INCLUDED CONTACT TYPE	ROUND SOCKET SINGLE MATING END ALL CONTACT GROUPINGS
INCLUDED CONTACT QUANTITY	16 SINGLE MATING END 2ND CONTACT GROUPING
INSERT MATERIAL DOCUMENT AND CLASSIFICATION	MIL-M-14,TYPE SDG-F MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END
INSERT MATERIAL	PLASTIC DIALLYL PHTHALATE SINGLE MATING END
OVERALL HEIGHT	0.375 INCHES NOMINAL
OVERALL LENGTH	2.761 INCHES MINIMUM AND 2.801 INCHES MAXIMUM
OVERALL WIDTH	0.186 INCHES NOMINAL
MATING END QUANTITY	1
PRECIOUS MATERIAL AND LOCATION	CONTACT SURFACES GOLD
PRECIOUS MATERIAL	GOLD
TERMINAL LOCATION	BACK SINGLE MATING END ALL CONTACT GROUPINGS
TERMINAL TYPE	SOLDER STUD SINGLE MATING END 2ND CONTACT GROUPING
TERMINAL TYPE	SOLDER WELL SINGLE MATING END 1ST CONTACT GROUPING
TEST DATA DOCUMENT	81349-MIL-C-21907 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
UNTHREADED MOUNTING HOLE DIAMETER	0.086 INCHES MINIMUM AND 0.100 INCHES MAXIMUM

Click here to Register for Free 30-day Trial