|
|
|
National Stock Number:
5935-00-238-6705
Federal Supply Class:
5935
National Item Identification Number:
002386705
Description:
CONNECTOR,RECEPTACLE,ELECTRICAL
Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| 357-7134-010 | 95105 | ROCKWELL COLLINS, INC. | | 82-805 | 74868 | AMPHENOL CORPORATION | | L00774 | 16236 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) | | EA116-1-1 | 91161 | ELECTRO IMPULSE LABORATORY INC | | TRU-5016-SSUG | 92180 | WINCHESTER INTERCONNECT RF CORPORATION | | N17C73109-9401 | 99993 | DEPARTMENT OF THE NAVY | | UG-560/U | 80058 | JOINT ELECTRONICS TYPE DESIGNATION SYSTEM | | UG-560/U | 92180 | WINCHESTER INTERCONNECT RF CORPORATION |
|
Techincal Specification:
| BODY STYLE | STRAIGHT SHAPE, EXTERNAL COUPLING | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.906 INCHES NOMINAL | | CONNECTOR LOCKING METHOD | EXTERNALLY THREADED SHELL | | CONTACT POSITION ARRANGEMENT STYLE | HN SINGLE MATING END | | CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT SURFACE TREATMENT | SILVER SINGLE MATING END SINGLE CONTACT GROUPING | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.906 INCHES NOMINAL | | ENVIRONMENTAL PROTECTION | PRESSURE PROOF | | INCLUDED CONTACT TYPE | COAXIAL PIN SINGLE MATING END SINGLE CONTACT GROUPING | | INCLUDED CONTACT QUANTITY | 1 SINGLE MATING END SINGLE CONTACT GROUPING | | INSERT MATERIAL | PLASTIC TETRAFLUOROETHYLENE SINGLE MATING END | | OVERALL HEIGHT | 1.188 INCHES NOMINAL | | OVERALL LENGTH | 1.875 INCHES NOMINAL | | OVERALL WIDTH | 1.188 INCHES NOMINAL | | MATING END QUANTITY | 1 | | NOMINAL THREAD SIZE | 0.750 INCHES | | PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACE SILVER | | PRECIOUS MATERIAL | SILVER | | PRECIOUS MATERIAL AND WEIGHT | 0.005 SILVER GRAINS, TROY | | RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS | 50.0 SINGLE MATING END SINGLE CONTACT GROUPING | | SHELL MATERIAL | COPPER ALLOY | | SHELL TYPE | SOLID | | TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING | | TERMINAL TYPE | SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 2A | | THREAD SERIES DESIGNATOR | UNEF | | THREAD QUANTITY PER INCH | 20 | | THREADED DEVICE TYPE | COUPLING FACILITY | | UNTHREADED MOUNTING HOLE DIAMETER | 0.125 INCHES NOMINAL |
|
|