5935-00-243-8292, ADAPTER,CONNECTOR

National Stock Number:
5935-00-243-8292

Federal Supply Class:
5935

National Item Identification Number:
002438292

Description:
ADAPTER,CONNECTOR

Detail:
An adapter with electrical contacts which provides facilities for joining two or more electrical connectors, whose design or function will not normally warrant their junction. It is not designed for permanent attachment to a cable, cord, coaxial line, or wire. The physical shape of an electrical connector should not be the determining factor of its name. Tee, angle, straight, and Y-shaped adapters are all ADAPTER, CONNECTOR. Excludes ADAPTER, CONNECTOR TO LAMPBASE; ADAPTER, LAMPHOLDER TO CONNECTOR; ADAPTER (1), CABLE CLAMP TO CONNECTOR; and ADAPTER, LAMPHOLDER. For items designed as a mechanical connection between an electrical conduit and an electrical connector, see ADAPTER (1), ELECTRICAL CONDUIT.

Manufacturer Information:

1160075P1	94117	BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC.
3080-2302	26805	TYCO ELECTRONICS CORP

Techincal Specification:

DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE	1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM
BODY STYLE	STRAIGHT SHAPE W/FLANGE
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT	0.713 INCHES MINIMUM AND 0.723 INCHES MAXIMUM
CONNECTOR LOCKING METHOD	EXTERNALLY THREADED SHELL
CONTACT POSITION ARRANGEMENT STYLE	N ALL MATING ENDS
CONTACT REMOVABILITY	NONREMOVABLE ALL MATING ENDS SINGLE CONTACT GROUPING
CONTACT MATERIAL	COPPER ALLOY ALL MATING ENDS SINGLE CONTACT GROUPING
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS	500.0 ALL MATING ENDS SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT	GOLD ALL MATING ENDS SINGLE CONTACT GROUPING
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH	0.713 INCHES MINIMUM AND 0.723 INCHES MAXIMUM
ENVIRONMENTAL PROTECTION	PRESSURE PROOF AND HEAT RESISTANT AND VIBRATION RESISTANT
INCLUDED CONTACT TYPE	COAXIAL SOCKET ALL MATING ENDS SINGLE CONTACT GROUPING
INCLUDED CONTACT QUANTITY	1 ALL MATING ENDS SINGLE CONTACT GROUPING
INSERT MATERIAL	PLASTIC TETRAFLUOROETHYLENE ALL MATING ENDS
OVERALL HEIGHT	0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM
OVERALL LENGTH	1.980 INCHES MINIMUM AND 2.000 INCHES MAXIMUM
OVERALL WIDTH	0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM
MATING END QUANTITY	2
NOMINAL THREAD SIZE	0.625 INCHES
PRECIOUS MATERIAL AND LOCATION	CONTACT SURFACES GOLD
PRECIOUS MATERIAL	GOLD
PRECIOUS MATERIAL AND WEIGHT	0.010 GOLD GRAINS, TROY
RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS	50.0 ALL MATING ENDS SINGLE CONTACT GROUPING
SHELL MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-763,CLASS 305 FED SPEC SINGLE MATERIAL RESPONSE
SHELL MATERIAL	STEEL COMP 305
SHELL TYPE	SOLID
THREAD DIRECTION	RIGHT-HAND
THREAD CLASS	2A
THREAD SERIES DESIGNATOR	UNEF
THREADED DEVICE TYPE	COUPLING FACILITY
UNTHREADED MOUNTING HOLE DIAMETER	0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM

Click here to Register for Free 30-day Trial