5935-00-250-0905, CONNECTOR,RECEPTACLE,ELECTRICAL

4540-00-250-0909 HEATING ELEMENT,ELECTRICAL,NONIMMERSION TYPE

National Stock Number:
5935-00-250-0905

Federal Supply Class:
5935

National Item Identification Number:
002500905

Description:
CONNECTOR,RECEPTACLE,ELECTRICAL

Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.

Manufacturer Information:

94-41722-12	02660	AMPHENOL CORP SPECTRA-STRIP/ITD
94-41722-12	77820	AMPHENOL CORP
DMS84029B	16236	DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS)

Techincal Specification:

TERMINAL LOCATION	BACK SINGLE MATING END ALL CONTACT GROUPINGS
TERMINAL TYPE	CRIMP SINGLE MATING END 1ST CONTACT GROUPING
	SOLDER WELL SINGLE MATING END 2ND CONTACT GROUPING
INCLUDED CONTACT TYPE	ROUND SOCKET SINGLE MATING END 1ST CONTACT GROUPING
	COAXIAL SOCKET SINGLE MATING END 2ND CONTACT GROUPING
	ROUND SOCKET SINGLE MATING END 3RD CONTACT GROUPING
INCLUDED CONTACT QUANTITY	2 SINGLE MATING END 1ST CONTACT GROUPING
	2 SINGLE MATING END 2ND CONTACT GROUPING
	17 SINGLE MATING END 3RD CONTACT GROUPING
MATING END QUANTITY	1
OVERALL HEIGHT	1.468 INCHES NOMINAL
OVERALL WIDTH	1.734 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT	1.281 INCHES NOMINAL
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH	1.250 INCHES NOMINAL
UNTHREADED MOUNTING HOLE DIAMETER	0.125 INCHES NOMINAL
THREADED DEVICE TYPE	MOUNTING HOLE
THREAD SERIES DESIGNATOR	UNC
NOMINAL THREAD SIZE	0.112 INCHES
THREAD CLASS	2B
SHELL TYPE	SOLID
SHELL MATERIAL	ALUMINUM ALLOY
SHELL SURFACE TREATMENT	CADMIUM AND
	CHROMATE
POLARIZATION METHOD	MATING END
INSERT MATERIAL	PLASTIC DIALLYL PHTHALATE SINGLE MATING END
CONTACT REMOVABILITY	REMOVABLE SINGLE MATING END 1ST CONTACT GROUPING
	NONREMOVABLE SINGLE MATING END 2ND CONTACT GROUPING
	REMOVABLE SINGLE MATING END 3RD CONTACT GROUPING
CONTACT MAXIMUM CURRENT RATING IN AMPS	20.0 SINGLE MATING END 1ST CONTACT GROUPING
	7.5 SINGLE MATING END 3RD CONTACT GROUPING
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS	600.0 SINGLE MATING END ALL CONTACT GROUPINGS
CONTACT MATERIAL	COPPER ALLOY SINGLE MATING END ALL CONTACT GROUPINGS
CONTACT SURFACE TREATMENT	GOLD AND
	SILVER SINGLE MATING END ALL CONTACT GROUPINGS
PRECIOUS MATERIAL	GOLD AND
	SILVER
PRECIOUS MATERIAL AND WEIGHT	0.021 GOLD GRAINS, TROY AND
	0.021 SILVER GRAINS, TROY
PRECIOUS MATERIAL AND LOCATION	CONTACT SURFACES GOLD AND
	CONTACT SURFACES SILVER

Click here to Register for Free 30-day Trial