5935-00-253-0121, CONNECTOR,RECEPTACLE,ELECTRICAL

5935-00-253-0122 CONNECTOR,RECEPTACLE,ELECTRICAL

National Stock Number:
5935-00-253-0121

Federal Supply Class:
5935

National Item Identification Number:
002530121

Description:
CONNECTOR,RECEPTACLE,ELECTRICAL

Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.

Manufacturer Information:

CA3100F22-22P

71468

ITT CANNON LLC

Techincal Specification:

BODY STYLE	STRAIGHT SHAPE, EXTERNAL COUPLING STRAIN RELIEF
CONTACT POSITION ARRANGEMENT STYLE	22-22 SINGLE MATING END
TERMINAL LOCATION	BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE	SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE	ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT QUANTITY	4 SINGLE MATING END SINGLE CONTACT GROUPING
MATING END QUANTITY	1
OVERALL LENGTH	2.750 INCHES MAXIMUM
OVERALL HEIGHT	1.625 INCHES NOMINAL
OVERALL WIDTH	1.625 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT	1.250 INCHES NOMINAL
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH	1.250 INCHES NOMINAL
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE	0.750 INCHES MINIMUM AND
	0.781 INCHES MAXIMUM
UNTHREADED MOUNTING HOLE DIAMETER	0.120 INCHES NOMINAL
CONNECTOR LOCKING METHOD	EXTERNALLY THREADED SHELL
THREADED DEVICE TYPE	COUPLING FACILITY
THREAD SERIES DESIGNATOR	UNEF
NOMINAL THREAD SIZE	1.375 INCHES
THREAD CLASS	2A
THREAD QUANTITY PER INCH	18
THREAD DIRECTION	RIGHT-HAND
CONNECTOR CABLE STRAIN RELIEF METHOD	CABLE CLAMP
CABLE ENTRANCE DIAMETER	0.350 INCHES MINIMUM AND
	0.735 INCHES MAXIMUM
SHELL TYPE	SOLID
SHELL MATERIAL	ALUMINUM ALLOY
SHELL SURFACE TREATMENT	CADMIUM AND
	CHROMATE
POLARIZATION METHOD	KEYWAY OR MULTIPLE KEYWAY
INSERT POSITION IN DEG	0.0
INSERT MATERIAL	RUBBER SINGLE MATING END
CONTACT REMOVABILITY	NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM CURRENT RATING IN AMPS	73.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS	500.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS	700.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT	GOLD AND
	SILVER SINGLE MATING END SINGLE CONTACT GROUPING
ENVIRONMENTAL PROTECTION	MOISTURE PROOF AND
	SALT WATER RESISTANT AND
	VIBRATION PROOF
PRECIOUS MATERIAL	GOLD AND
	SILVER
PRECIOUS MATERIAL AND WEIGHT	0.020 GOLD GRAINS, TROY AND
	0.020 SILVER GRAINS, TROY
PRECIOUS MATERIAL AND LOCATION	CONTACT SURFACES GOLD AND
	CONTACT SURFACES SILVER

Click here to Register for Free 30-day Trial