5935-00-256-3352, CONNECTOR,RECEPTACLE,ELECTRICAL

5905-00-256-3353 RESISTOR,FIXED,COMPOSITION

National Stock Number:
5935-00-256-3352

Federal Supply Class:
5935

National Item Identification Number:
002563352

Description:
CONNECTOR,RECEPTACLE,ELECTRICAL

Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.

Manufacturer Information:

50-645-1969-31	98291	ITT CANNON RF PRODUCTS
877-103-1	91836	WINCHESTER INTERCONNECT CORPORATION
SMB683772	28528	ITT INDUSTRIES INC ITT AEROSPACE COMMUNICATIONS DIV EAST
SMB683772	31550	L3HARRIS TECHNOLOGIES, INC.
SMB683772	80063	US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR
SMB650625-2	80063	US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR

Techincal Specification:

THREAD CLASS	2A
THREAD QUANTITY PER INCH	36
THREAD DIRECTION	RIGHT-HAND
SHELL TYPE	SOLID
SHELL MATERIAL	STEEL COMP 303
SHELL MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-763,CLASS 303 FED SPEC SINGLE MATERIAL RESPONSE
SHELL SURFACE TREATMENT	GOLD
INSERT MATERIAL	PLASTIC TETRAFLUOROETHYLENE SINGLE MATING END
CONTACT REMOVABILITY	NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS	50.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MATERIAL	COPPER SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MATERIAL DOCUMENT AND CLASSIFICATION	QQ-C-530 FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT	GOLD AND
	COPPER SINGLE MATING END SINGLE CONTACT GROUPING
ENVIRONMENTAL PROTECTION	CORROSION RESISTANT AND
	PRESSURE PROOF AND
	MOISTURE PROOF
PRECIOUS MATERIAL	GOLD
PRECIOUS MATERIAL AND WEIGHT	0.105 GOLD GRAINS, TROY
PRECIOUS MATERIAL AND LOCATION	CONTACT AND BODY SURFACES GOLD
BODY STYLE	STRAIGHT SHAPE, EXTERNAL COUPLING
CONTACT POSITION ARRANGEMENT STYLE	NONSTD SINGLE MATING END
TERMINAL LOCATION	BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE	SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE	COAXIAL SOCKET SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT QUANTITY	1 SINGLE MATING END SINGLE CONTACT GROUPING
MATING END QUANTITY	1
OVERALL LENGTH	1.075 INCHES MINIMUM AND
	1.085 INCHES MAXIMUM
BUSHING DIAMETER	0.250 INCHES NOMINAL
OVERALL HEIGHT	0.495 INCHES MINIMUM AND
	0.505 INCHES MAXIMUM
OVERALL WIDTH	0.495 INCHES MINIMUM AND
	0.505 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT	0.335 INCHES MINIMUM AND
	0.345 INCHES MAXIMUM
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH	0.335 INCHES MINIMUM AND
	0.345 INCHES MAXIMUM
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE	0.310 INCHES NOMINAL
UNTHREADED MOUNTING HOLE DIAMETER	0.097 INCHES MINIMUM AND
	0.107 INCHES MAXIMUM
CONNECTOR LOCKING METHOD	EXTERNALLY THREADED SHELL
THREADED DEVICE TYPE	COUPLING FACILITY
THREAD SERIES DESIGNATOR	UNS
NOMINAL THREAD SIZE	0.250 INCHES

Click here to Register for Free 30-day Trial