|
|
|
National Stock Number:
5935-00-257-9014
Federal Supply Class:
5935
National Item Identification Number:
002579014
Description:
CONNECTOR,RECEPTACLE,ELECTRICAL
Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| 408-4302558-1 | 24558 | NAVAL SEA COMBAT SYSTEMS ENGINEERING STATION | | 7411329PT1 | 03538 | LOCKHEED MARTIN CORPORATION | | 89-222-11P | 02660 | AMPHENOL CORP SPECTRA-STRIP/ITD | | 89-222-11P | 50738 | WIRE-PRO, INC DBA WPI-SALEM DIVISION | | 891-222-11P | 52196 | CATON CONNECTOR CORPORATION |
|
Techincal Specification:
| BODY STYLE | STRAIGHT SHAPE THREADED | | CONTACT POSITION ARRANGEMENT STYLE | 22-11 SINGLE MATING END | | TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING | | TERMINAL TYPE | CRIMP SINGLE MATING END SINGLE CONTACT GROUPING | | INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING | | INCLUDED CONTACT QUANTITY | 2 SINGLE MATING END SINGLE CONTACT GROUPING | | MATING END QUANTITY | 1 | | OVERALL LENGTH | 1.406 INCHES NOMINAL | | OVERALL DIAMETER | 1.875 INCHES NOMINAL | | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 1.156 INCHES NOMINAL | | BUSHING ACCOMMODATION HOLE SHAPE | ROUND | | CONNECTOR LOCKING METHOD | EXTERNALLY THREADED SHELL | | THREADED DEVICE TYPE | COUPLING FACILITY AND | | MOUNTING BUSHING | | THREAD SERIES DESIGNATOR | UNEF | | NOMINAL THREAD SIZE | 1.375 INCHES | | THREAD CLASS | 2A | | THREAD QUANTITY PER INCH | 18 | | THREAD DIRECTION | RIGHT-HAND | | SHELL TYPE | SOLID | | SHELL MATERIAL | ALUMINUM ALLOY | | SHELL SURFACE TREATMENT | ANODIZE | | POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY | | INSERT POSITION IN DEG | 0.0 | | INSERT MATERIAL | PLASTIC DIALLYL PHTHALATE SINGLE MATING END | | CONTACT REMOVABILITY | REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT MAXIMUM CURRENT RATING IN AMPS | 22.0 SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 1750.0 SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS | 2450.0 SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END SINGLE CONTACT GROUPING | | ENVIRONMENTAL PROTECTION | WATERTIGHT | | TEST DATA DOCUMENT | 81349-MIL-C-5015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | PRECIOUS MATERIAL | GOLD | | PRECIOUS MATERIAL AND WEIGHT | 0.010 GOLD GRAINS, TROY | | PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD | | SPECIFICATION/STANDARD DATA | 81349-MIL-C-5015 GOVERNMENT SPECIFICATION |
|
|