|
|
|
National Stock Number:
5935-00-412-0632
Federal Supply Class:
5935
National Item Identification Number:
004120632
Description:
CONNECTOR,RECEPTACLE,ELECTRICAL
Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| AS81703 | 0U583 | SAE INTERNATIONAL | | AS81703 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | MS3130P19-7P | 0U583 | SAE INTERNATIONAL | | MS3130P19-7P | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | MILC81703 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS3130P19-7P | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | SAE-AS81703 | 0U583 | SAE INTERNATIONAL |
|
Techincal Specification:
| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.510 INCHES MINIMUM AND 0.557 INCHES MAXIMUM | | BODY STYLE | STRAIGHT SHAPE, FLANGE MOUNT, EXTERNAL COUPLING | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.890 INCHES MINIMUM AND 0.922 INCHES MAXIMUM | | CONNECTOR CABLE STRAIN RELIEF METHOD | POTTING TYPE | | CONNECTOR LOCKING METHOD | SPRING FRICTION | | CONTACT POSITION ARRANGEMENT STYLE | 197P SINGLE MATING END | | CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END SINGLE CONTACT GROUPING | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.890 INCHES MINIMUM AND 0.922 INCHES MAXIMUM | | ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT AND SALT WATER RESISTANT AND VIBRATION RESISTANT | | INCLUDED CONTACT QUANTITY | 7 SINGLE MATING END SINGLE CONTACT GROUPING | | INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING | | INSERT POSITION IN DEG | 0.0 | | OVERALL HEIGHT | 1.208 INCHES MAXIMUM | | OVERALL LENGTH | 1.640 INCHES MAXIMUM | | OVERALL WIDTH | 1.208 INCHES MAXIMUM | | MATING END QUANTITY | 1 | | SHELL MATERIAL | ALUMINUM ALLOY | | SHELL TYPE | POTTING | | SHELL SURFACE TREATMENT | CADMIUM | | POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY | | PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACE GOLD | | PRECIOUS MATERIAL AND WEIGHT | 0.007 GOLD GRAINS, TROY | | PRECIOUS MATERIAL | GOLD | | UNTHREADED MOUNTING HOLE DIAMETER | 0.104 INCHES MINIMUM AND 0.136 INCHES MAXIMUM | | SPECIFICATION/STANDARD DATA | 81349-MIL-C-81703 GOVERNMENT SPECIFICATION | | TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING | | TERMINAL TYPE | SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING | | TEST DATA DOCUMENT | 81349-MIL-C-81703 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|