|
|
|
National Stock Number:
5935-00-472-1733
Federal Supply Class:
5935
National Item Identification Number:
004721733
Description:
ADAPTER,CONNECTOR
Detail:
An adapter with electrical contacts which provides facilities for joining two or more electrical connectors, whose design or function will not normally warrant their junction. It is not designed for permanent attachment to a cable, cord, coaxial line, or wire. The physical shape of an electrical connector should not be the determining factor of its name. Tee, angle, straight, and Y-shaped adapters are all ADAPTER, CONNECTOR. Excludes ADAPTER, CONNECTOR TO LAMPBASE; ADAPTER, LAMPHOLDER TO CONNECTOR; ADAPTER (1), CABLE CLAMP TO CONNECTOR; and ADAPTER, LAMPHOLDER. For items designed as a mechanical connection between an electrical conduit and an electrical connector, see ADAPTER (1), ELECTRICAL CONDUIT.
|
Manufacturer Information:
| 11589329 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| BODY STYLE | STRAIGHT SHAPE W/FLANGE | | OVERALL LENGTH | 2.110 INCHES MINIMUM AND | | 2.140 INCHES MAXIMUM | | OVERALL HEIGHT | 1.341 INCHES MINIMUM AND | | 1.406 INCHES MAXIMUM | | OVERALL WIDTH | 1.341 INCHES MINIMUM AND | | 1.406 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.057 INCHES MINIMUM AND | | 1.067 INCHES MAXIMUM | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.057 INCHES MINIMUM AND | | 1.067 INCHES MAXIMUM | | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.975 INCHES MINIMUM AND | | 0.985 INCHES MAXIMUM | | UNTHREADED MOUNTING HOLE DIAMETER | 0.115 INCHES MINIMUM AND | | 0.130 INCHES MAXIMUM | | CONNECTOR LOCKING METHOD | EXTERNALLY THREADED SHELL | | THREADED DEVICE TYPE | COUPLING FACILITY | | THREAD SERIES DESIGNATOR | UNEF | | NOMINAL THREAD SIZE | 1.125 INCHES | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | NOMINAL THREAD LENGTH | 0.625 INCHES | | SHELL TYPE | SOLID | | SHELL SURFACE TREATMENT | CADMIUM | | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL C FED SPEC SINGLE TREATMENT RESPONSE | | POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY | | INSERT POSITION IN DEG | 0.0 | | MATING END QUANTITY | 2 | | CONTACT POSITION ARRANGEMENT STYLE | 18-11 SINGLE MATING END | | INSERT MATERIAL | RUBBER ALL MATING ENDS | | INSERT MATERIAL DOCUMENT AND CLASSIFICATION | MIL-R-3065 MIL SPEC SINGLE MATERIAL RESPONSE ALL MATING ENDS | | INCLUDED CONTACT QUANTITY | 5 1ST MATING END ALL CONTACT GROUPINGS | | 5 2ND MATING END ALL CONTACT GROUPINGS | | CONTACT REMOVABILITY | NONREMOVABLE ALL MATING ENDS SINGLE CONTACT GROUPING | | ENVIRONMENTAL PROTECTION | HEAT RESISTANT AND | | MOISTURE PROOF |
|
|